45 Degree Automatic Flammability Tester

• 

45 Degree Automatic Flammability Testertest instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface.including bed sheets, blankets, mattresses, pillows, duck down quilts and plush fabric products used to cover the bed.

Test principle:

Within a specified time, the surface of the test sample is burned with a standardized flame, so that the burning, damage degree or discoloration of the standard test paper can be observed, and then the test fabric can be graded and evaluated.

Body stainless steel structure:
SCM control, control interface friendly, easy to operate
Heavy hammer timing stop device, timing accurate
Standard fire mouth
Accessories and Consumables:
Combustion gas supply Device
50 mercerized cotton sewing machine line

Features:

Stainless steel case with transparent viewing window

18 Needle flame, flame length adjustable

Ignition time can be set freely

Automatic timing of flame spread in 0.1 second increments.

Automatic or manual flame impingement for 1,5 or 20 seconds.

Provide bristles and sample clamps

Provide standard stainless steel sample holder

Technical Parameters:

▶ Flowmeter : Adjust the gas flow size;
▶Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
▶Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
▶Control panel : Power- power switch ;Start:Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
▶Reset : Timer reset /Fire tube reset;
▶Sample clamp and specimen holder : The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
▶Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
▶Test room size: W368 × D216 × H356mm
▶Sample shelf angle: 45 °
▶Flame spread time setting range: 0.01S-99.99S
▶ignition time of the sample surface : 1.0S ± 0.05S

Другие товары поставщика

	Conveyor Belt Drum Friction Testing Machine	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction testing machine has extensive application value in mu...
	Fabric Downproof Tester(Rolling Box)	Fabric anti-drilling velvet testerMainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a vari...
	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
	Aerosol Foams Flammability Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi...
	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M...

Похожие товары

	Steaming Cylinder	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15....
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061...
	Button Impact Tester丨Button Impact Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt...
	AATCC Viewing Board丨AATCC Viewing Board tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ...