Textile Leather Testing Equipment for ISO 11640
Application
IULTCS Rubbing Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of ‘marring’ of the leather surface or the finish and to assess the amount of color transfer from the sample to the rubbing pad under dry or wet conditions.
Test Procedure
The sample is placed on the test surface and clamped; pre-tensioning can be effected by adjustment of the knob or screw in requested percentage. The felt pad is inserted in the end of the rubbing head and the tester switched on. The material surface and the rubbing pad are inspected visually. In the case of colour transferring, the wool-felt rubbing pad is evaluated using the grey scale.
IULTCS Rubbing Fastness Tester Specifications
lRubbing finger: 500±25 g(or 1000g by adding a load mass)
lLoading weight: 500±10 g
lDimension of base of finger: 15 x 15 mm
lSpecimen: 120x20mm
lRubbing stroke: 35 ~ 40 mm
lSpeed of rubbing: 40± 2cycles/min
lCounter: LCD,1-999.999 times, automatically stops
Specifications
| Model load | GX-5042 |
| Friction hammer | 500g |
| Auxiliary load | 500g |
| Rubbing length | 35mm ~40mm |
| Speed of abrasive head | 40±2 R/min |
| Area of specimen | 120×20mm |
| Motor | DC 120W |
| Area of wool felt | 15×15mm |
| Weight | 5N, 9N for each |
| Counter | LED,0~999.999 |
| Power | 1.AC220V,2A |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Dry microbial penetration resistance tester | The Dry Microbial Penetration Resistance Tester assesses material resistance to dry bacteria-carrying particles (like human dandruff-sized). It tes... |
 |
Cleveland Open Cup Flash Point Tester | The instrument can automatically test the flash point and ignition point of petroleum products (the ignition point of oil exceeding 80 ° C, exc... |
 |
Catheter bending resistance test device | Product introduction The tester is composed of a programmable controller, a touch screen, a force sensor, a transmission device, an airborne print... |
 |
SDC Fading Grey Scale | Standards ISO 105-A02(Grey Scale for Assessing Change in Color) AATCC Evaluation Procedure 1(Grey Scale for Stain and Color Change) BS EN ISO ... |
 |
Bio-absorbable Internal Fixation Plates and Screws Test device | Standard YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axia... |
Похожие товары
 |
Steaming Cylinder | Продавец: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Продавец: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Продавец: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Продавец: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Продавец: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
