88PCS thread repair kit for thread repairment
1.Drilling:
1.Drill out the damaged threads using the proper drill, drill to a sufficient depth to accommodate the CL-COIl insert length and the bolt or screw being used.
2.Tapping:
Drilled holes to be tapped with our taps for the corresponding size of insert to be installed.
3. installation:
Place the inset on installation tool, positon the adjustable ring, so that the insert tang is in center of tang slot.
Place the installation tool over the hole and wind the insert into the hole until the top coil is 1/2 turn below the top surface.
4. Removal the tang
To blow-off the Tang after fitment of Inserts by tang break tools, give a sharp blow to remove the tang; the bolt can go through and through. Due to the narrow and exact tolerance the new thread normally is stronger than original one.
Другие товары поставщика
|
Drill bit |
Advantages: 1. Standard: DIN338, DIN1897, DIN340; 1/16"-1" for ASME, screw machine, taper length.2. Steel material: M2(6542), M35, M42, HSS 9341, H... |
|
|
88pcs Thread Repair Kit,Thread Repair Kit |
|
Free Running Thread Inserts With High Quality |
Xinxiang Changling Metal Products Co.,Ltd is a famous free running thread inserts with high quality factory with free running thread inserts with h... |
|
thread buhsing made by Changling Metal |
Introduction:
1.The screw threads being locked by polygonal deformation of one or more turns of the thread.
2.This deformation results in a po... |
|
self tapping insert with cutting slot |
Self Tapping Inserts (also known as self threaded inserts or Ensats) are cylindrical metal bushings with internal and external threads and are spec... |
Все товары поставщика
Похожие товары