Blind & Buried VIA PCB

• 

Custom blind and buried vias fabricationfrom professional and experienced pcb board supplier at low cost.

First of all, we start with traditional multi-layer boards. The structure of a standard multi-layer circuit board is a process including an inner layer line and an outer layer line, followed by drilling, and metallization in the hole to achieve the internal connection function of each layer line. However, due to the increase in line density, the way parts are packaged is constantly updated. In order to allow for a wider board area, more high-performance parts can be placed. In addition to the thinner line width, the aperture is also reduced from 1 mm in the DIP jack to 0.6 mm in SMD, and further reduced to 0.4 mm or less. However, the surface area is still occupied, so that there are buried holes and blind holes.

The Buried Holes and Blind Holes are Defined as Follows

Blind Vias: A blind via is a type of via that connects the inner trace of the PCB to the trace of the PCB surface. This hole does not penetrate the entire board.

Buried Vias: Buried vias are only connected to the type of vias between the inner layers, so they are not visible from the surface of the PCB.

Advantages of Blind Buried Hole Printed Circuit Board

Eliminate a large number of through-hole designs and increase wiring density and package density;

Diversify and complicate the design of the interconnect structure of the multi-layer board;

Significantly improved the reliability of multi-layer boards and the electrical performance of electronic products.

The Following Three Points are Distinguished for Blind Buried Plate Boards

In contrast to the through hole, the through hole refers to a hole through which each layer is drilled, and the blind hole is a non-drilled through hole.

Blind hole subdivision: blind hole, buried hole (outer layer is not visible).

Distinguish from the production process: blind holes are drilled before pressing, and through holes are drilled after pressing.

Blind buried hole technology is mainly used on relatively high-end PCBs, with high technical content and high requirements for PCB board manufacturers.

Другие товары поставщика

	PTFE Teflon PCB	PTFE Teflon PCB has excellent comprehensive performance: high temperature resistance (-192°C-260°C), corrosion resistance (strong acid, str...
	Gold Fingers PCB	Among the large-scale use of PCI and optical modules and cable sockets, the gold fingers PCB has been divided into: long and short gold fingers, br...
	High Tg PCB	What is High Tg PCB When the temperature rises to a certain area, the substrate will change from "glass state" to "rubber state", and the temperatu...
	Edge Plating/Half-hole PCB	Edge Plating/Half-hole PCB Hard Gold PCB HARD GOLD PCBVia in Pad VIA IN PAD PCB FABRICATION Conventional PCB Impedance Control PCB Gold Fingers PCB...
	Aluminium Core PCB	Aluminium Core PCB Aluminium Core PCB Copper Core PCB COPPER CORE PCBFerrum Core PCB FERRUM CORE PCB Aluminium Core PCB is a metal-based copper cla...

Похожие товары

	SC-5803 Electric Chainsaw	Продавец: Zhejiang GuYueHu Industry&Trade Co.,Ltd.	SC-5803 Electric Chainsaw Mini cordless battery operated hand chain saw. Portable handheld recha...
	Lithium Ion Battery Products of Eco Power	Продавец: Eco Power Group	Eco Power Group is more than a li ion battery company. We design, manufactures, and sell advanced...
	Электрическая Бесщеточная Интегрированная Пила Для Деревообработки	Продавец: Гуанчжоуская промышленная компания Яму Пайле	Параметры продукта: Большая мощность двигателя: 1600 Вт Маленькая мощность двигателя: 550 В...
	WP-210 Боковая Шлифовальная Машина Деревообрабатывающая Машина	Продавец: Гуанчжоуская промышленная компания Яму Пайле	Основные технические нормы: Диапазон обработки: 60 - 210мм Толщина обработки: 5 - 4 мм С...
	Electric hair clipper, hair salon, rechargeable black hair management device OH-1808	Продавец: Cixi Hongqiao Hardware Plastic Co., Ltd.	Professional custom-made titanium stainless steel blades are customized for professional hair sal...