Digital control mattress spring fatigue tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The King Size Foam Fatigue Tester complies with or references the following standards:
ASTM D3574 – Dynamic Fatigue Test by Constant Force Pounding
ISO 2439 – Determination of indentation hardness and deflection
GB/T 26706 – General Technical Requirements for Mattresses (related clauses reference)
Parameters
| Parameter | Unit | Specification |
|---|---|---|
| Test Station | — | Single station |
| Applicable Mattress Size | — | King size, California King |
| Loading Method | — | Pneumatic |
| Loading Mode | — | Constant force / constant displacement |
| Maximum Test Frequency | cycles/min | ≤ 70 |
| Cylinder Stroke | in | 12 (customizable) |
| Indenter Diameter | mm | 250 |
| Load Measurement | — | Fatigue-rated load cell |
| Load Cell Capacity | lb | 500 |
| Positioning System | — | Manual X–Y gantry |
| Sample Retention | — | Four adjustable corner retainers |
| Control System | — | PLC with touchscreen interface |
| Air Supply Requirement | PSI | 80 |
| Power Supply | — | 120 VAC |
Features
Large test platform suitable for King and California King mattresses
Dual testing modes supporting constant force and constant displacement fatigue tests
Pneumatic loading system designed for high-cycle durability testing
Fatigue-rated load cell ensuring stable and repeatable dynamic load measurement
Manual X–Y gantry system allowing fatigue testing at any mattress location
Adjustable four-corner sample retainers for secure mattress positioning
High-frequency operation up to 70 cycles per minute to improve test efficiency
Touchscreen PLC control system for parameter setting, monitoring, and test control
Modular design supporting optional indenter sizes, stroke lengths, and load cell capacities
Accessories
Circular indenter, 250 mm diameter (ASTM D3574 compliant)
Pneumatic loading cylinder and air regulation components
Fatigue-rated load cell
Manual X–Y positioning gantry
Adjustable mattress corner retainers
PLC controller with touchscreen display
Compressed air connection components
Test Procedures
Place the mattress flat on the test platform
Adjust the four corner retainers to secure the mattress position
Select constant force or constant displacement test mode
Set test frequency, load or displacement value, and cycle count
Position the indenter using the X–Y gantry to the target test area
Start the fatigue test and allow the system to operate automatically
The system stops automatically upon reaching the preset cycle count
Remove the mattress after the indenter returns to the home position
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Micro Rapid Closed Cup Flash Point Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Reference Standards： SH/T 0768. SN/T 3077.1. DL/T 1354. ASTM D6450 SN/T 3077.2. ASTM D7094... |
 |
Infusion Pump Flow Rate Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Infusion Pump Flow Rate Tester is specifically designed for testing the flow rate of so... |
 |
High precision touch haptics testing equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Domestic automotive interior tactile evaluation standards. (2) OEM internal... |
 |
Blow-By Test Rig，ISO 8178 internal combustion engine blow-by test system | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test system for the characterisation of the oil content in blow-by gases at engine test sys... |
 |
Vacuum Cleaner Filtration Test System，vacuum cleaner particle capture efficiency tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Vacuum Cleaner Filters for emission characterisation of vacuum cleaners (EN 60312) For emi... |
Похожие товары
 |
Industrial automotive sunshade end cap assembly line supplier | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
