RTV-2 Silicone Rubber for Plaster Mold Making
Description of RTV-2 Silicone Rubber for Plaster Mold Making
RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consists of Part A base silicone and Part B CA30 curing agent, and Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction. These materials can be cast into the cured silicone molds: plaster polyurethane, PU, GRC, cement, resin, polyester, wax etc...
Applications of RTV-2 Silicone Rubber for Plaster Mold Making
RTV2028/2030 silicone rubber is suitable for plaster, sculpture and GRC mold making.
Technical datasheet of RTV-2 Silicone Rubber for Plaster Mold Making
Base and Curing Agent Mixture (100:2 by weight) in 25 ℃ (77F) testing
Item No. |
RTV 2030 |
Color |
off-white |
Curing agent |
CA30 |
Mixing ratio |
100:2 |
Mixed viscosity |
cps |
Pot life |
30-40 Minutes |
Curing time |
4-6 Hours |
Hardness |
28-30 Shore A |
Tear Strength |
30 N/mm |
Tensile Strength |
|
Relative density |
|
Shrinkage |
≤0.3% |
Elongation at break |
480% |
How to make the silicone mold?
The surface of the original objects should be clean and free of loose material. If your products have thin flower patterns, and especially have porous substrates, please use a suitable mold release agent such as soap water, detergent, Vaseline or petroleum jelly.
- Mixing
Please weigh Part A silicone base and part B CA30 Curing Agent with ratio of 100:2 into a clean container. Stir Part A base silicone thoroughly before use, then Mix Part A and Part B evenly until the curing agent completely dispersed in the silicone base. Manual or mechanical mixture can be used, but do not last much time or allow the temperature to exceed 35℃ (95℉).it’s suitable to mix small quantities to ensure thorough mixture of silicone base and curing agent.
Note: It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mixture to completely expand and then collapse. After a further 1 to 2 minutes under vacuum, the mixture should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original object, avoiding air entrapment. The catalyzed material will cure to a flexible rubber within 6 hours (or faster by different mixing ratio or room temperature), we advice you de-mold after 24 hours, it is will improve the replicate times of silicone mold.
Packing of RTV-2 Silicone Rubber for Plaster Mold Making
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 0.25kg/bottle,1kg/bottle and 10kg/bottle
Storage of RTV-2 Silicone Rubber for Plaster Mold Making
When the RTV-2 silicone rubber is stored at or below 30 C (85F) in the original unopened containers, Silicone Base and CA30 Curing agent have a usable life of 12 months from the date of production.
Note of RTV-2 Silicone Rubber for Plaster Mold Making
RTV2030 silicone rubber is an industrial product and must not be used in food molding, dental human skin molding applications.
Send product request
Other supplier products
RTV-2 Silicone Rubber for Shoe Mold Making | Description of RTV-2 Silicone Rubber for Shoe Mold Making RTV-2 silicone rubber is a two-component material, the silicone consists of Part A silic... | |
RTV-2 Silicone Rubber for Stone Mold Making | Description of RTV-2 Silicone Rubber for Stone Mold Making RTV-2 silicone rubber is a two-component material, this kind of silicone rubber consist... | |
Skin Casting Silicone Rubber | RTV Life casting liquid silicone rubber Applications of Skin Casting Silicone Rubber Life casting silicone suitable for human skin model made, ... | |
RTV-2 Silicone Rubber for Mold Making | Introduction RTV-2 is a two-component Room-Temperature-Vulcanizing (RTV-2) silicone rubber. Depending on its curing mechanism, two types of RTV-... | |
Tin Base Mold Making Silicone | Description of Tin Base Mold Making Silicone RTV2 Tin-based silicones, also called condensation cure silicone, are two- component materials which ... |
Same products
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... | |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... | |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... | |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... | |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |