Free sample rtv2 mould making silicone rubber for Architectural Molding
Free sample rtv2 mould making silicone rubber for Architectural Molding
Architectural Molding Silicone
Product No.: C-825 and C-830
Brand: GuoChuang Silicone
Application: Making molds for brackets, panels, cornice moulding, statuary etc.
Keyword: mold making silicone rubber, rtv2 silicone rubber, liquid silicone rubber,s liquid silicone for molding
Architectural Reproduction and Restoration specialists use GC liquid mold silicone rubbers to make site molds of aging/damaged ornate architectural elements (e.g., brackets, panels, cornice moulding, statuary). From these molds, reproductions of damaged elements can be cast in the controlled environment of a mold shop. These imperfect castings are resculpted to their original beauty so a rubber production mold can be made from this revised model. This production mold allows repeated casting of the new architectural element in concrete, glass fiber reinforced concrete, plaster, plastic, fiberglass, or other casting media as required for interior or exterior mounting.
C-825/C-830 room-temperature curing silicone rubber are popular mold materials for this application and are available in pourable, brushable and sprayable options.
C-825/C-830 is A tin-cured silicone rubber with a 100A:3B mix ratio (digital scale required to measure) and a demold time of 3-4 hours. Tin-cured silicones are slightly less expensive than platinum-cured silicones, but have a shorter library life and shrink slightly on cure.
Typical general characteristics |
Inspection Method |
Value |
|
Product data (Catalyzed A+B) |
C-825 |
C-830 |
|
Hardness |
Shore A |
25±2 |
30±2 |
Mix Ratio |
A:B |
100:3 |
100:3 |
Color |
/ |
White |
White |
Pot life |
25 °C (77F) |
30-40mins |
30-40mins |
Curing time |
25 °C (77F) |
3-4 hours |
3-4 hours |
Mixed viscosity |
20000±1000 |
23000±1000 |
|
Tear-strength |
kg/cm |
22±2 |
23±2 |
Tensile-strength |
|||
Elongation |
% |
450±50 |
460±50 |
Shrinkage |
% |
≤0.3 |
≤0.3 |
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
Send product request
Other supplier products
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds | Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds Artificial Stone & Concrete Casting Silicone Rubber Features: Ama... | |
wholesale price 2 parts mould making silicone rubber liquid for Tire Molding | wholesale price 2 parts mould making silicone rubber liquid for Tire Molding Tire Molding Silicone Features Application: GC RTV silicone G-8 se... | |
High quality rtv Molding Silicone rubber for furniture mold making | High quality rtv Molding Silicone rubber for furniture mold making Furniture Molding Silicone GC RTV silicone C-825 are good for furniture moldin... | |
China manufacturer mold making liquid silicone rubber for Grc Gfrc moulding | China manufacturer mold making liquid silicone rubber for Grc Gfrcmoulding Grc & Gfrc Molding Silicone GRC/GFRC is a new kind of material use... | |
Cheap price two component silicone rubber liquid for model making | Cheap price two component silicone rubber liquid for model making Model Making Silicone 1 Description GC silicone mold rubbers are widely used t... |
Same products
Embossed Silicone Rubber Wristbands/Bracelets Bulk | Seller: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... | |
SILICONE BRACELET | Seller: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... | |
Silicone Square ICE Cube Tray | Seller: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... | |
Silicone Sports Bottle | Seller: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... | |
Silicone Sphere Tray | Seller: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |