jmy505 50ohm coaxial cable rfid reader and writer modules
JMY505 series are RFID reader/writer module with UART and IIC serial ports. JMY505 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
- PCD: MF RC500, RC531, RC632, RC400
- Working frequency: 13.56MHz
- Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- RF standard: ISO14443A, ISO14443B, ISO15693
- Operating distance: 100mm(depending on card and antenna design)
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- EEPROM: 512 Bytes
- Interface: IIC & UART (selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- Max.command length: 511 Bytes
- Interface level: 3.3V(TTL level; 5V tolerance)
- Power supply: DC 5.0V
- Power consumption: 70mA
- Dimension: 42mm×21mm×8mm
- Package: DIP32
- Weight: about 15g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
Send product request
Other supplier products
 |
hf 13.56mhz rfid reader/writer LCD display with arm7 mcu - mr800 | MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User c... |
 |
jmy501 hf 13.56mhz rfid reader and writer modules | JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of con... |
 |
jmy506 iic i2c uart interface hf rfid reader and writer modules | JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of con... |
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
 |
hf 13.56mhz ISO15693 ID reader - mr760 | MR760 series, based on NXP SL RC400, is the desktop reader. The reader supports series IC cards according to ISO15693, and the reader imitates the ... |
Same products
 |
Carbon Steel Bridge Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... |
 |
Customized Thrie-Beam Highway Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... |
 |
Non Blocked MASH-TL3 Single Steel Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |
 |
Hot Dip Galvanized W-Beam Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | hot dip galvanized w-beam guardrailis cost-effective highway barriers designed to reduce the coll... |
 |
S355JR Steel W Beam Road Crash Barrier | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | This hot-dip galvanized steel W beamis one of the highway safety products from DACHUconforms to A... |
