RS232C interface HF RFID Reader/Writer Module JMY612
JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through RS232C interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
- PCD: NXP RC531 RC632 RC500
- Working frequency: 13.56MHz
- RF standard: ISO14443A, ISO14443B
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default ON
- SAM card slot: 4 slots, 9600bps--115200bps
- EEPROM: 512 Bytes
- Interface: RS232C, IIC, UART, USB
- Communication rate: bps
- Max.command length: 1024 Bytes
- Interface level: 3.3V(TTL level; 5V tolerance)
- Power supply: DC 5.0V
- Power consumption: 150mA
- Dimension: 86.5mm×65mm×9.5mm
- Weight: about 50g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
Send product request
Other supplier products
 |
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 | JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
|
|
RS232C interface HF RFID Reader/Writer Module JMY612 | JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactle... |
 |
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 | JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
 |
usb hid interface hf 13.56mhz rfid reader - mr761 | MR761 series, based on NXP PCD, is the desktop reader. The reader supports series IC cards according to ISO14443A, ISO14443B and outputs the data b... |
 |
hf 13.56mhz rfid reader/writer LCD display with arm7 mcu - mr800 | MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User c... |
Same products
 |
Carbon Steel Bridge Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... |
 |
Customized Thrie-Beam Highway Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... |
 |
Non Blocked MASH-TL3 Single Steel Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |
 |
Hot Dip Galvanized W-Beam Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | hot dip galvanized w-beam guardrailis cost-effective highway barriers designed to reduce the coll... |
 |
S355JR Steel W Beam Road Crash Barrier | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | This hot-dip galvanized steel W beamis one of the highway safety products from DACHUconforms to A... |
