Handheld Fiber Polishing Machine (HK-M)
Handheld fiber polishing machine HK-M Features: 1 HK-M Handheld fiber polishing machine is Homk 2012 new machine, it also adopt two Janpan mini motors, inside uses bearing drive work(Inside wheel bead in turn), will not wear out other metal parts. 2 HK-M Handheld fiber polishing machine is suitable for small batch polishing, return polishing. Excellent performance, high efficiency and durable polishing machine 3 Handheld fiber polishing machine is very good mobility, a maximum of 6 polishing head. Polishing cycle is very short, inside all components adopt USA PQP metal hardening technology, Surface hardness up to 80 degrees, it is highly wearable. 4 Operation flexibility is high fast processes (just 30S)each kind of connectors(can processing: FC, SC, ST, LC, MU, MTP. MPO, MT, MTRJ, E2000 ect)with high effect, low insert loss and low return loss. Low repair coefficient. The good interchangeability and repeatability. 5 Handheld fiber polishing machine is very suitable for laboratory and engineering construction application and good stability. HK-M has a strong shell packaging, simple design easy to operate. And
Convenient and safe to carry Handheld fiber polishing machine Parameter
1. Applicable Connectors: FC, SC, ST, MU, LC, E2000, MPO, MTP, MTRJ UPC or APC and so on,
2. Weight: 2.85Kg
3. Dimensions: 100mm L*120mm W*120mm H
4. Power: 12vDC
5. Polishing Time: 0 - 30 sec. (1 piece timer)
6. Polishing Method: Rotation & revolution
7. Motor speed: 100rpm/rotation
3.3rpm/revolution
8. Power: 15W
9. Polishing capacity: 1-6connectors
10 Voltage: 12VDC
11. Plate size/ Film size: 68mm Environmental protection, simple design easy to operate.
Other supplier products
|
|
Polishing fixture |
Polishing fixture
The polishing fixture is IPC Structure, Independent compression of each connector. Polishing fixture pass rate with Interference... |
|
|
Glue Dispenser |
Glue dispenser
The glue dispenser with time control, to push the liquid.
Penumatically, the glue dispenser controlled by timer, to be sure the sa... |
|
|
Fiber Polishing Machine (HK-20U) |
HK-20U fiber polishing machine speed can be adjust by freely rotate buttom from 0-120rpm.
1) HK-20U fiber polishing machine exceeds requirements ... |
|
|
Fiber polishing jig |
Fiber polishing jig
The fiber polishing jig is IPC Structure, Independent compression of each connector. Fiber polishing jig pass rate with Interf... |
|
|
Fiber polishing fixture |
The fiber polishing fixture is IPC Structure, Independent compression of each connector. This fiber polishing fixture pass rate with Interference> ... |
All supplier products
Same products
