5750 taber linear abraser
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ISO Standards: ISO 9352. ISO 5470. ISO 7784
ASTM Standards: ASTM D1044. ASTM D3884. ASTM D4060
Chinese Standards: GB/T 5137.1. QB/T 2726
German Standard: DIN 53109
ASTM D3884. ASTM D1175. ASTM D1044. ASTM D4060. ASTM D4685.
TAPPI T476. ISO 9352. ISO 5470-1.
JIS K7204. JIS A1453. JIS K6902. JIS L1096. JIS K6964. DIN 52347. DIN 53109.
DIN 53754. DIN 53799. SATRA TM163
Features
Digital Control Interface: LCD screen displays real-time speed (30–75 RPM adjustable) and allows manual or programmed cycle settings.
Advanced Balance System: Rear arm equipped with interchangeable counterweights (250g, 500g, 750g, 1000g) for precise pressure control, including 125g ASTM compliance.
Adjustable Vacuum System: Height-adjustable suction port adapts to materials of varying thicknesses, efficiently removing debris during testing.
Modular Abrasion Wheels: Replaceable wheels (e.g., CS-10. H-18) and sandpaper discs (S-11) cater to diverse material testing needs.
Sample Preparation Kit: Includes sample stickers (S-36) and a diamond wheel polisher for pre-test surface conditioning.
Parameters
| Parameter | Specification |
|---|---|
| Rotational Speed | Adjustable: 30–75 RPM (digital control) |
| Sample Diameter | 100 mm |
| Test Platform Diameter | 113 mm |
| Cycle Range | 1–999.999 revolutions (presettable) |
| Air Pressure | 250g (standard) |
| Weight Options | 250g, 500g, 750g, 1000g (included); 125g (optional) |
| Wheel Pressure Range | 125g, 250g, 500g, 750g, 1000g, 1250g |
| Vacuum Arm Adjustment | Height-adjustable |
| Power Supply | 220V, 50Hz |
| Dimensions | 220 (W) × 380 (D) × 300 (H) mm |
| Net Weight |
20 kg |
Accessoriess
Standard accessories:Grinding wheel system,Worktable.Control system,Counter,Load unit.
Test Procedures
The typical test procedure for the Taber abrasion tester includes:
1. Preparing the accessories and test sample.
2. Mounting and securing the prepared sample on the test platform.
3. Mounting the friction wheel onto the clamp and applying the balance weights to both sides.
4. Adjusting the vacuum pump's suction height and removing debris from the sample.
5. Mounting the sample at the other station of the instrument in the same manner.
6. Turning on the instrument and setting the bearing drive count on the timer.
7. Starting the instrument; the friction wheel will circulate and rub the sample at a set speed.
8. The test will automatically stop after reaching the set value. Remove the friction wheel and weights, loosen the clamp, and remove the sample.
9. The test is complete. Turn off the instrument, remove the sample for analysis and comparison to evaluate the material's abrasion resistance.
Send product request
Other supplier products
 |
ASTM ISO Bearing Torque Testing Equipment Supplier Factory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Bearing friction torque is an important factor affecting bearing noise, vibra... |
 |
FMVSS 209 5-Station Seatbelt Webbing Abrasion Tester Manufacturer Factory Direct | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features Multi-Station Design: Test up to five samples simultaneously for hi... |
 |
Oxidizing Solids Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - M... |
 |
Qinsun Ci xenon lamp aging test chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc... |
 |
Manikin Coughing System（Cough Simulator） | Application HVAC research and education, including indoor air quality evaluation, breathing and coughing exposure risk assessment in confined spac... |
