PPE Wearable Cooling & Dehumidifying

Product Background:

1. Wearing PPE(e.g., waterproof aprons, surgical gowns, surgical caps, respirators, face shields, boots, and gloves) and certain airtight garment or clothing long time can often increase risk for heat-related illnesses.

2. It is necessary and required in order to reduce or eliminate exposure to external hazards (chemicals, physical hazards, and disease-causing organisms [e.g., viruses and bacteria]). Reduces the body’s normal way of getting rid of heat by sweating and other means.

3. Wearable PPE that protects against heat exposures are called auxiliary cooling systems or personal cooling systems (e.g., water-cooled garments, air-cooled garments, cooling vests, and wetted overgarments) and can range in simplicity, cost, and maintenance.

4. Wearable personal cooling systems could also be used during a rest period where the worker is not actively engaged in work. Core body temperature decreases relatively slowly, and simply stopping hard work will not result in an immediate decrease. Therefore, increasing the rate of heat removal from the body would reduce the risk for heat-related illness. Using wearable personal cooling systems could reduce the time required to lower core body temperature.

5. Currently some wearable personal cooling systems have limitations within a work setting, such as:

• Ice vests are cheap, but their tem¬perature cannot be controlled and they often do not stay cool long enough to be practical.

• If the cooling system is too cold, this will result in reduced heat transfer from the body to the environ¬ment.

• Water-cooled garments require that the worker be tethered to a system that circulates the cool water, which limits the person’s range of operation.

Product Introduction:

1. Faster cooling speed and Longer cooling time

The protective suit internal temperature can be reduced by 8 degrees within 10 minutes, to about 23-24 degrees like in air condition environment, equivalent to reducing the temperature of the environment by 4 degrees Celsius, which can increase HCWs working efficiency.

2. Dehumidify

This wearable PCS dehumidification capacity is equivalent to reducing the ambient humidity by 10%, it help to reduce HCWs sweating, which will avoid fogging situation on HCWs protective glasses.

3. Light and Portable

Compared with other water PCS device, our device is much more lighter than other ice pack system. And this device can replace battery outside the protective clothing, so it can maintain a constant cooling power.

Specification:

1. Blower Parameters:

Air flow 60 ~ 90 L/min

Pressure drop 200～450 Pa

2. Hot end heat sink:

Material: Aluminum 6063

3. Battery paramete:

High temperature polymer lithium battery, 3.7V, 50mm*80mm*5mm, when used for blowing, three batteries are connected in series to provide 12V voltage, when used for refrigeration tablets, three batteries are connected in parallel to provide 5.5A curre

Other supplier products

	Ink Printing Sample Press / Ink Printing Trial Press	How it works: Ink printing proof machine is mainly based on the principle of printing reproduction, through the simulation of the press pressure, ...
	Rubber hose outer coating wear testing machine	Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir...
	FPC Flex Durability Tester	Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioning, low noise, can be used for a long time 2. program-c...
	Leather Freezing Flexing Tester	IntroductionLeatherFreezingFlexing tester is used for testing the upper leather, synthetic leather and other cold level, in order to fully understa...
	In-situ expansion analysis device	Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas...

All supplier products

Same products

	Steaming Cylinder	Seller: Standard International Group (HK) Limited	Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin...
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Seller: Standard International Group (HK) Limited	Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	Seller: Standard International Group (HK) Limited	Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to...
	Button Impact Tester丨Button Impact Test mechine	Seller: Standard International Group (HK) Limited	Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista...
	AATCC Viewing Board丨AATCC Viewing Board tester	Seller: Standard International Group (HK) Limited	Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m...