Bally Type Flexometer丨Bally Type Flexometer Meter
Standards
EN ISO 20344:6.6. I.U.P.10+20. I.U.P.20. UNI 4818. DIN 53.351. UNE/I.U.P.20
Applications
The Bally flexometer is the internationally-accepted method for the assessment of the flexing endurance of light leathers and their surface finishes. The tendency for cracks to form in the creases caused by walking can also be determined. The Bally flexer has a different flexing mechanism to the vamp flexer and is complementary to it. It is also used to precondition samples prior to determining water vapour permeability - particularly in assessing uppers for protective footwear.
Product Information
The twelve stations are conveniently arranged for user access and the mounting of samples. A pre-determined counter is fitted to the machine, allowing it to be operated without continuous attendance as the machine stops automatically once the set count is reached.
Mechanical characteristics
The Bally flexometermachine is simple to use, is bench mounted and supplied ready to connect to the electrical supply.
The equipment with either 6. 12 working stations are also available.
Low temperature versions of this equipment are also available (to -20°C) subject to ambient temperatures in location of machine.
Send product request
Other supplier products
 |
Safety Helmet Lateral Rigidity Tester | Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-2 (Industrial Safety Helmets – Lateral Deformati... |
 |
Cabin Air Filter Test System（Particle removal & Gas adsorption），ISO 11155 Cabin Air Filter Performance Test | Test System for both particle separation and gas absorption/desorption of of air filters for passenger compartments (DIN 71460-1/2. ISO 11155-1/2).... |
 |
Carbon Black Content meter | Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ... |
 |
PV Light Induced Degradation (LID) Testing Chamber | Applications The Light Decay Test Chamber is designed as an indoor exposure system, primarily used for standard module and cell degradation testin... |
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester | Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness of dust in the production and processing places such as a... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
