Manifold
Manifold
Choke and Kill manifold
Choke manifold and Killing manifold are the important well control equipments to carry out close balance drilling in petroleum exploration. During well drilling process, these equipments can keep oil reservoir from pollution and efficiently control well blowout. That product designs a manufacturing according to the API Spec 16 C standard, the machine function is good, sealing completely credibility, the function is well-found, operating convenience.
Main Technical Parameters
Name Choke Manifold Killing Manifold
Type JG35 YJG35 YJG70 YJG70A YJG35 YG70 YG70A
Main&side passage diameters 103×65mm
Working pressure 35MPa 70MPa 35MPa 70MPa
Working medium -29~121 ℃
Working medium ud oil (H 2 S)
Type of control Double wing
manual Double hydraulic Triple wing hydraulic Single wing with clea valve
Mud manifold
The mud manifold is applicable on land and forms a complete set with the drilling, Which working temperature is -29~121℃,medium is water or mud, and connections are threaded or flanged.
MAIN TECHNICAL PARAMETERS
Working Pressure psi(MPa) 2000~10000(14~70) Nominal Bore in(mm) 2~4 (50~100)
Product Specification Level PSL 1~3 Material Class AA~FF
Performance Requirement Level PR 1~2 Working Temperature P.U
(-29~121℃)
Other supplier products
|
Drill Collar Slips |
DCS Drill Collar Slips, there are three model: S, R and L, they can accommodate drill collar from 3”(76.2mm) to 14”(355.6mm)O.D.
Type WT Drill Col... |
|
Taper tap |
Taper tap
Taper tap is an internal catch fishing tool designed to retrieve tubular members from the well bore. It is the most economical tool of it... |
|
Mud Pump |
F Series Triplex Mud Pump is designed according to Emsco F series mud pump, its expendable parts at the fluid end are interchangeable with the part... |
|
DDZ Elevators |
Elevators
DDZ Elevators
Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The elevators are ... |
|
Safety Clamps |
Safety Clamps are the essential hold-up device for drilling string and drill tools. When adjusting the working range, it only needs to reassemble c... |
All supplier products
Same products