Universal abrasion resistance tester for textiles
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
ASTM D3885： Standard Test Method for Abrasion Resistance of Textiles - Curved-Surface Method (Bending and Abrasion Method)
ASTM D3886： Standard Test Method for Abrasion Resistance of Textiles - Pneumatic Diaphragm Method (Pneumatic Diaphragm Apparatus)
ASTM D3514： Test Method for Pilling Resistance and Other Surface Changes of Textiles (Elastic Pad Method)
AATCC 119 ：Color Change Due to Flat Abrasion (Sanding): Wire Mesh Method - Textile Resistance to Flat Abrasion Colorfastness (Frosting Effect)
AATCC 120 ：Color Change Due to Flat Abrasion (Sanding): Emery Cloth Method
FTMS 191 Method 5300 ：Test Method for General Abrasion Resistance of Textiles
FTMS 191 Method 5302 ：Test Method for General Abrasion Resistance of Textiles
Features
1. Fully automatic testing mode with automatic counting, automatic shutdown upon completion, and audible alert. Clamp-style specimen fixation enables rapid sample replacement to enhance testing efficiency.
2. Compact structural design facilitates mobility and adaptability, meeting diverse practical application requirements.
3. Accurately delivers material abrasion performance test results, supporting flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, frosting, edge sealing, and napping resistance tests.
Parameters
| Parameter | Specification |
|---|---|
| Test Mode | Automatic (ensures accurate, repeatable results; no operator evaluation required) |
| Gripping Device | Advanced design, maintains constant sample tension |
| Test Heads | Flat-grinding (inflatable membrane wear test method) + mill-grinding (includes required weight and initial abrasive) |
| Built-in Features | Timer and mechanical cycle counter |
| Table Configuration | Reciprocating table, with flat-grinding / mill-grinding test head mounted on top |
| Clamping Ring Inner Diameter | 94 mm |
| Lock Ring Height | ≤ 9.5 mm |
| Speed | 120 ± 15/min |
| Moving Stroke | 25 mm |
| Air Pressure | 62 kPa (9 psi) |
| Dimensions (L × W × H) | 330 × 500 × 460 mm |
| Weight | 33 kg (72 lb) |
| Power Supply | 120/230 V, 50/60 Hz, 2A / 1A |
Test Procedures
1. First, prepare the accessories and test samples.
2. Using the sample wrench, disassemble the fixture. Place the drum membrane and sample into the fixture, tighten, and secure the fixture.
3. Secure the abrasive to the upper fixture and attach the weights.
4. Turn on the instrument, enter the operation interface, set the number of cycles, and adjust the air pressure value.
5. As air pressure increases, the sample expands to a certain height. Lower the upper fixture to bring the abrasive into contact with the test specimen.
6. Press the start button to initiate continuous friction between the abrasive and the test specimen.
7. When the sample wears through, the test automatically stops. Turn off the instrument to end the test.
8. Remove the test specimen for analysis and comparison to evaluate the material's surface wear resistance.
Send product request
Other supplier products
 |
Solid Combustion Rate Tester | This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test N.1: Test Method fo... |
 |
Button Impact Machine | With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0.84kg (29.5oz) is released... |
 |
Helmet Projection and Surface Friction tester | The helmet projection and surface friction tester is a device used to test the frictional force between the helmet surface and other objects. Its m... |
 |
Falling Sand Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Standard JG/T 133-2000 ASTM D968-83 ASTMD333 ASTMD1395 ASTMD2205 Main Purp... |
 |
Wear Track Profilometer | A wear profiler is a device used to measure the characteristics of worn surfaces, providing high-precision wear rate measurements. It provides reli... |
Same products
 |
Industrial automotive sunshade end cap assembly line supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
