Type 2X two-stage rotary vane series vacuum pump
The 2X series vacuum pump is of two-stage structure, its operation performance consists of two parts, high-pressure stage and lowpressure stage. Its suction port is connected with the vacuum container or other vacuum equipments to helps intaking or draining the gas inside the container during operation. When the equipment is in vacuum, the high-pressure stage drain valve will be closed, then the gas suctioned by the high-pressure stage will be transferred to the second stage, after that, the gas will be suctioned and drained through the second stage, so that the vacuum equipment can get a certain extent vacuum. The technical parameter of the pump is 6×10-2Pa. According to the user's operation requirements, to equip a vacuum booster pump, and this pump is used as a backing pump. Since the booster pump increased suction force, accompanied with the continuous suction of the backing pump, the equipment will obtain higher vacuum percentage.
Other supplier products
|
Type 2X two-stage rotary vane series vacuum pump |
The 2X series vacuum pump is of two-stage structure, its operation performance consists of two parts, high-pressure stage and lowpressure stage. It... |
|
JYWQ and JPWQ stainless steel pump |
JYWQ and JPWQ stainless steel pump series adopt an automatic mixer based on a common sewage pump.The mixer turns with the motor shaft to produce an... |
|
SK series liquid ring type vacuum pump SK-3 |
SK series liquid ring vacuum pump and compressor is used to suction or compress air and other gas that is non-corrosive, unsolvable in water and wi... |
|
Removable Cold Water Meter |
Dry-dial,the reading can be kept clear in long-term service Magnetic drive Less resistance of tran smission Less head loss,long life of service Ser... |
|
Multi-jet Dry-dial Cold Water Meter |
1.iron shell ;2.Magnetic drive ;3.Dry dial register;4.Easy and long term clear reading;5.Iron body can be painted or nickel coated;6.High accuracy;... |
All supplier products
Same products