UTERSHydraulic parts,one-stop service,to solve yourwound fi

Produced by:

All supplier products

   

Henan Uters International CO.,LTD was established in 10 years ago,located in the convenient transportation Henan Province,Zhengzhou City,City area,North Third Ring Road,is a long-term commitment to wound filter,Fuel Filter,PRECISION FILTER,Reliable performance Suction Filteras one of the new enterprise.and UTERSfollow the principle ofdo prior life,adhere to the principle quality of survival, innovation and development, treating customers with cordiality and credit, adhere to the business concept people-oriented, customer first.Our company relies on first-class technical strength, to achieve a [network] [website development] business.

   The advantage of UTERSPRECISION FILTERis that it can provide more professional and thoughtful solutions timely and accurately according to the actual needs of customers.At the same time, Our company follow the latest developments on Industry and agriculture,Manufacturing,Mechanical hardware processing, and establish long and steady partnership relation with many well-known enterprises in the same industry , to provide customers with the most professional, advanced FILTER CARTRIDGEx1dd01f6n.Details:
Analysis of the noise caused by the failure of the hydraulic parts

Analysis of the noise caused by the failure of the hydraulic parts The failure of hydraulic components leads to noise and suction. It is one of the main reasons for the high noise of hydraulic pumps. The distributor of hydraulic pumps is also one of the most important components that easily cause noise. Here we will introduce in detail.
1. plunger pump or motor noise
(1) the phenomenon of air suction is one of the main reasons for the high noise of the hydraulic pump. When the air is mixed into the air, it is easy to form cavitation phenomenon in its high pressure area and propagate in the form of pressure wave, resulting in oil oscillation, resulting in cavitation noise. The main reasons are as follows:
(1) the oil filter of the hydraulic pump, the plugging of the inlet pipe or the high viscosity of the oil can cause the high vacuum at the inlet of the pump to make the air infiltrate.
(2) the damage of the oil seal on the shaft end of the hydraulic pump, the pilot pump, or the bad seal of the inlet pipe, resulting in the air entry.The oil level of the oil tank is too low to make the hydraulic pump suck into the air directly.When there is high noise in the work of the hydraulic pump, the above parts should be checked first and the problem should be dealt with in time. (2) the internal components of the hydraulic pump excessive wear, such as piston pump cylinder and valve plate, the plunger and the plunger hole with pieces of the wear and tear, injury, make a serious leak in the hydraulic pump, when the hydraulic pump output pressure and flow pulsation will produce small flow oil, causing high noise. At this time, the deflection angle of the pilot system variable mechanism can be appropriately increased to improve the effect of internal leakage on the output flow of the pump. The servo valve spool and the flow control piston of the hydraulic pump will also cause the piston to fluctuate during the movement due to local wear and tear. It will cause the fluctuation of the output and pressure of the hydraulic pump, resulting in larger vibration and noise at the outlet of the pump. In this case, the brush plating and replacement can be done for the elements with serious wear and tension.
(3) the flow plate of the hydraulic pump is also one of the most important components of the noise. Because of the surface wear or sludge deposition at the opening of unloading groove, the unloading slot will be shortened and the unloading position will be changed, resulting in the phenomenon of trapped oil, which will cause higher noise. During the normal repair process, the disc repaired by flat grinding will also have the consequences of shortening the unloading slot. If it is not properly slender in time, it will also cause great noise. During the assembly process, the large unloading groove of the distributor plate must be installed in the high pressure chamber of the pump, and the direction of its sharp angle must be opposite to the rotation direction of the cylinder block, otherwise, it will also bring great noise to the system. 2. hydraulic cylinder noise
(1) the air in the oil liquid or the air in the hydraulic cylinder is not completely exhausted, and the cavitation phenomenon is produced under the action of high pressure, which causes large noise. At this time, the air must be exhausted in time. (2) the oil seal of the cylinder head is too tight or the piston rod is bent. In the process of movement, the noise will be caused by the strength of the cylinder. At this time, the oil seal or the straightening piston rod must be replaced in time.
3. pipe noise
Too much pipe dead bending or fixed clip loosening can also produce vibration and noise. Therefore, arrangements should be in the pipeline to avoid dead corner Nagarze to loose to be timely tightening.
Noise of 4. overflow valve
The overflow valve is prone to generate high frequency noise, mainly due to the unsteady performance of the pilot valve, which is the noise generated by the air vibration caused by the high frequency oscillation of the pilot valves front chamber. The main reasons are as follows:
(1) the air is mixed with the oil, and the cavitation phenomenon is formed in the front of the pilot valve, which causes the high frequency noise. At this time, the air should be exhausted in time to prevent the air from reentering the outside world. (2) during the operation of the needle valve, excessive wear is caused by frequent opening. The conical valve and the valve seat can not be tightly closed, causing the noise of the pilot flow to be unstable and generate pressure fluctuations. At this time, it should be repaired or replaced in time.
(3) the pressure regulating function of the pilot valve is unstable due to the fatigue deformation of the spring, which makes the pressure fluctuate and cause the noise, and the spring should be replaced at this time>

   After years of development, in addition to County,UTERS has been extended toTianjin,County,City area,City area,City area and other places with unremitting efforts and in the development and explosion of FILTER CARTRIDGE. Our company is committed to provide a perfect Filter equipment and accessories services to the old and new users , enjoying common praise from the majority of insiders and users . To get more product details, please call the hotline: 0371-58535088, or visit our official website: www.hqfiltration.com.




Send product request

To:
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

UTERS is an Integrated enterprise that professionalFILTER C
UTERS is an Integrated enterprise that professionalFILTER C     FILTER CARTRIDGEx1dd01f6nandStainless steel filterof Henan Uters International CO.,LTDis favored by the majority of customers...
WATER FILTERstainless steel filter mesh price,preferred HQF
WATER FILTERstainless steel filter mesh price,preferred HQF     water filter cartridgeandPRECISION FILTERof Henan Uters International CO.,LTDis favored by the majority of customers love, We...
You have the chance of getting precision filter for a bette
You have the chance of getting precision filter for a bette     Henan Uters International CO.,LTD is a professional supplier which provides a variety of FILTER ELEMENT, to provide customers...
Filter equipment and accessoriesis customer first for the p
Filter equipment and accessoriesis customer first for the p    Henan Uters International CO.,LTDis a panel filterx1dd01f6n,HYDRAULIC OIL FILTERin one large multi-functional integrated modern e...
UTERS Hydraulic Filtershave not only reliable  quality but
UTERS Hydraulic Filtershave not only reliable quality but     Henan Uters International CO.,LTD,10 years ago officially entered the Tonghua City market. As we all know, Henan Uters Intern...
All supplier products

Same products

culinary argan oil
culinary argan oil Seller: ARGANisme in the world’s finest tables , there is always one common ingredient, this ingredient is co...
Head Rotor 146401-0520 VE4/10R for NISSAN AD23
Head Rotor 146401-0520 VE4/10R for NISSAN AD23 Seller: China Lutong Parts Plant-- Head Rotor 146401-0520 VE4/10R for NISSAN AD23 China Lutong Parts Plant is a professional OEM &a...
Head Rotor 146401-3220(9 461 615 357) VE4/10R for MITSUBISHI 4D56(L200)
Head Rotor 146401-3220(9 461 615 357) VE4/10R for MITSUBISHI 4D56(L200) Seller: China Lutong Parts Plant-- China Lutong Parts Plant is a professional OEM & aftermarket parts supplier which specialized...
Head Rotor 146403-6820 VE4/10L for MAZDA WLT /FORT RANGER
Head Rotor 146403-6820 VE4/10L for MAZDA WLT /FORT RANGER Seller: China Lutong Parts Plant-- Head Rotor 146403-6820 VE4/10L for MAZDA WLT /FORT RANGER China Lutong Parts Plant is a professi...
Truck Element PS7100 2 418 455 333 for IVECO / PE6P130A720RS7226
Truck Element PS7100 2 418 455 333 for IVECO / PE6P130A720RS7226 Seller: China Lutong Parts Plant-- Truck Element PS7100 2 418 455 333 for IVECO / PE6P130A720RS7226 China Lutong Parts Plant is a p...