.

Ti Sintered Powder Filter

Ti Sintered Powder Filter Technical Data
Raw Material: Ti
Filter Rating Range: 0.22 Micron - 100 Microns
Operation Temperature: ≤ 300 ℃
Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 80 mm, 90 mm, 100 mm
Length: 5'' (127 mm), 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector/Fitting/Adaptor:
1. DOE
2. Code 2 (226+Flat End)
3. Code 3 (222+Flat End)
4. Code 7 (226+Fin End)
5. Code 8 (222+Fin End)
6. Thread (NPT,BSP,G,M,R)
7. Flange
8. Special customization

Ti Sintered Powder Filter Feature
1.Ti sintered powder filter is made from ti powder particle
2.Ti sintered powder filter is sintered in a high temperature vacuum furnace
3.Ti sintered powder filter is depth filtration
4.Ti sintered powder filter has narrow pore size distribution
5.Ti sintered powder filter is suitable for food industry and medicine industry (GMP) because ti is an in-noxious metal and an inert metal
6.Ti powder particle will not shed in the filtration process
7.High dirt holding capacity
8.High porosity
9.High filter rating accuracy
10.The effect of filtration is good
11.High filter efficiency
12.Good permeability
13.Pressure loss is low in filtration process
14.High flow rate at low differential pressure
15.High compression strength
16.High mechanical strength
17.High abrasion resistance
18.High durability against most liquids, gases and aggressive steam
19.High temperature resistance
20.High corrosion resistance
21.Backwash
22.Washable and Cleanable
23.Reusable
24.Long service life

Application
1.Steam filtration
2.High temperature liquid filtration
3.High temperature gases filtration
4.Catalysts powders recovery
5.Precoat support filtration



Send product request

To: XINXIANG ZWEN FILTER CO.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Sintered Mesh Filter
Sintered Mesh Filter Sintered Mesh Filter Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating Range: 0.5 Micron - 2000...
Sintered Wire Mesh Filter Cartridge
Sintered Wire Mesh Filter Cartridge Sintered Wire Mesh Filter Cartridge Technical ParameterRaw Material: SS 316L, SS 304Filter Media: ZWEN Sintered Wire MeshFilter Rating Range: 0.5 M...
Sintered Metal Filter
Sintered Metal Filter Sintered Metal Filter Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating Range: 0.5 Micron - 200...
Metal Powder Filter Disc
Metal Powder Filter Disc Metal Powder Filter Disc Technical Data Raw Material: SS 316L, Titanium Filter Rating Range: 0.22 Micron - 100 Microns Operation Temperature: ≤ ...
Sintered Mesh Filter Plate
Sintered Mesh Filter Plate Sintered Mesh Filter Plate Technical ParameterRaw Material: SS 316L, SS 304Filter Rating Range: 0.5 Micron - 2000 MicronsFilter Efficiency: > 99...
All supplier products

Same products

SANLAND TECHReverse Amplifier Module,preferred choice for y
SANLAND TECHReverse Amplifier Module,preferred choice for y Seller: Shenzhen Sanland Technology Co.,Ltd. Shenzhen Sanland Technology Co.,Ltd. is a professional supplier which provides a variety of Hybri...
ALUMINIUM ROLL FORMING MACHINE
ALUMINIUM ROLL FORMING MACHINE Seller: JIANGYIN BOSJ SCIENCE AND TECHNOLOGY CO LTD How to Prevent Rust Treatment of Aluminum Profile Cold Forming Machine The gear oil used in the ...
DOUBLE LAYER ROLL FORMING MACHINE
DOUBLE LAYER ROLL FORMING MACHINE Seller: JIANGYIN BOSJ SCIENCE AND TECHNOLOGY CO LTD The main function of double layer roll forming machineis to form two kinds of profiles. But it c...
C & Z PURLIN ROLL FORMING MACHINE
C & Z PURLIN ROLL FORMING MACHINE Seller: JIANGYIN BOSJ SCIENCE AND TECHNOLOGY CO LTD Fire Damper Blade C & Z Purlin Aluminium Sheet Roll Forming Machine Fire Damper Blade C &...
C & U CHANNEL ROLL FORMING MACHINE
C & U CHANNEL ROLL FORMING MACHINE Seller: JIANGYIN BOSJ SCIENCE AND TECHNOLOGY CO LTD Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It consi...