.

Submersible Vertical High Pressure China Sand Suction Solid Sewage Slurry Pump

. Application and Features

Type SP/SPR pumps are vertical, centrifugal slurry pumps that are submerged in sump to work. They are
designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.

Wet parts of type SP pumps are made of abrasion-resistant metal.

All parts of type SPR pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particles.


The type with "L" is a series of sump pump with an extended shaft, which is suited for the working condition of the deeper lever. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.

Features

  • Flow passage components: this type of pumpuse wear-resistant metal, the impeller choose to wear-resistant metal or rubber.
  • Bearing components:we usegrease lubrication. According to the slag slurry pool, liquid height can choose different lengths of pump shaft or suction pipe.
  • Sealing: Doesn't need any shaft sealor shaft seal water. In suction volume, an insufficient conditions also can work normally below.


What are the operations and maintenance of the centrifugal pump?
1 Regularly observe and record the pump's inlet and outlet pressure gauge motor voltmeter, ammeter and bearing thermometer indication values, find abnormal phenomena, should analyze the reasons and deal with them in time.
2 Always listen to the internal sound with the listening needle, pay attention to whether there is friction or collision sound, and if the sound is significantly changed or has abnormal sound, stop the pump immediately.
3 Always check the lubrication of the bearing to see if the rotation of the oil ring is flexible, and its position and oil supply are normal.
4 The temperature rise of the bearing should not exceed 30~40 degrees, and the maximum temperature of the bearing should not exceed 70 degrees.
5 Check if the dripping of the pump packing seal is normal.
6 If it is a large-scale water pump with circulating oil supply, it should also be checked frequently whether the working condition of the oil supply equipment is normal and whether the bearing oil return is smooth.
7 When the bearing is cooled with cooling water, it should also be noted that the cooling water flow is normal.
8 bearing vibration of the running pump also needs to be monitored

Contact Us:

Kevin Liu/Mr.

Hebei Minerco Machinery & Equipment Co., LTD

P:

A: No. 12 Zhongshan Road Mancheng District, Baoding, Hebei, China

Web:



Send product request

To: Hebei Minerco Machinery & Equipment Co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Metal to Metal Sealed Floating Ball Valve for Hard Condition
Metal to Metal Sealed Floating Ball Valve for Hard Condition Product Description A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It i...
Anti Corrosion Stainless Steel Chemical Pump with 18.5kw Motor
Anti Corrosion Stainless Steel Chemical Pump with 18.5kw Motor Product Descriptionanti corrosion stainless steel chemical pump with 18.5kw motor aresingle-stage end-suction centrifugal pumps which are used to t...
Sp Series Submerged Vertical Suspended Pump for Slurry
Sp Series Submerged Vertical Suspended Pump for Slurry SP series submerged vertically suspended pump for slurry Product Description vertical suspended pump Introduction: TypeSP/SPRisSump Pumpdesign...
Ih Series Stainless Steel Horizontal Chemical Pump for Industrial Project
Ih Series Stainless Steel Horizontal Chemical Pump for Industrial Project Product Description Product classification:Stainless steel corrosion-resistant centrifugal pump Flow:4m3/h-200m3/hHead:15m-125mApplicable medium...
EPDM Rubber Wafer Type Ductile Iron Material Hand Lever Butterfly Valve
EPDM Rubber Wafer Type Ductile Iron Material Hand Lever Butterfly Valve Product DescriptionThe valve is mainly used to cut off non-corrosive fluid. It is also can be designed to have the function of adjusting and cuttin...
All supplier products

Same products

Radio frequency integrated circuitForward amplifier module
Radio frequency integrated circuitForward amplifier module Seller: Shenzhen Sanland Technology Co.,Ltd. Shenzhen Sanland Technology Co.,Ltd. is a professional supplier which provides a variety of Hybri...
Radio frequency integrated circuitIntegrated Circuit IC low
Radio frequency integrated circuitIntegrated Circuit IC low Seller: Shenzhen Sanland Technology Co.,Ltd. Shenzhen Sanland Technology Co.,Ltd. is a professional supplier which provides a variety of Hyb...
16Y-02B-00004 SHANTUI SD16 bulldozer parts
16Y-02B-00004 SHANTUI SD16 bulldozer parts Seller: Jining Skyline Machinery CO.,LTD ,
16Y-02B-00003 SHANTUI SD16
16Y-02B-00003 SHANTUI SD16 Seller: Jining Skyline Machinery CO.,LTD ,
16Y-02B-00002 SHANTUI SD16 bulldozer parts
16Y-02B-00002 SHANTUI SD16 bulldozer parts Seller: Jining Skyline Machinery CO.,LTD ,