Electronic Component, a leadingPCB Manufacturingbrand which
Shenzhen Jie Du State Technology Co., Ltd.located in Guangdong Province,Shenzhen City,Futian district,Futian Road, Futian District, Shenzhen, China,with elegant environment and convenience.market information delivered smoothly.Jieduo state technology LTD is a specialized PCB Manufacturingx19b6516n,PCB manufacturer company.
Jieduo state technology
PCB Manufacturing
Production of the circuit board mini, visualization, and for optimizing production plays an important role in fixing circuit with the electrical layout.
PCB board, PCB board, aluminum plate, high frequency board, PCB, ultra-thin circuit board, ultra-thin circuit board, printing (copper etching technology circuit board, etc. circuit board makes the circuit mini, visualization , For the fixed circuit of mass production and optimization of electrical appliances play an important role.
First, print the circuit board
Will draw a good circuit board with a transfer paper to print out, pay attention to the sliding side of their own, the general print two circuit boards, that is, a piece of paper to print two boards. In which to choose the best print production board.
Cutting copper cladding
Use the photosensitive plate to make the circuit board full diagram. CCL, that is, both sides are covered with copper film circuit board, the CCL cut into the size of the circuit board, not too large to save material.
Pretreatment of CCL
With fine sandpaper on the surface of the copper oxide layer polished off to ensure that the transfer circuit board, the thermal transfer paper on the toner can be firmly printed on the CCL, polished the standard is bright, no obvious Stains.
Transfer circuit board
Will print the printed circuit board cut into the appropriate size, printed on the side of the printed circuit board on the CCL, aligned after the CC into the thermal transfer machine, put into the paper must ensure that the transfer paper is not dislocation. In general, after 2-3 times the transfer, the circuit board can be very strong transfer on the CCL. Heat transfer machine has been preheated in advance, the temperature set at 160-200 degrees Celsius, due to the high temperature, the operation of attention to safety!
Corrosion circuit board
First check whether the printed circuit board is complete, if there is a small number of places can not be transferred with a black oil pen repair. And then can be corroded, and so on the circuit board exposed copper film is completely corroded, the circuit board removed from the etching solution clean, so that a circuit board corrosion is good. The composition of the etching solution is concentrated hydrochloric acid, concentrated hydrogen peroxide, water, the ratio of 1: 2: 3, in the preparation of corrosive solution, the first water, then concentrated hydrochloric acid, concentrated hydrogen peroxide, if the operation of concentrated hydrochloric acid, concentrated hydrogen peroxide or corrosive solution Carefully splashed on the skin or clothing to be cleaned with water in time, due to the use of strong corrosive solution, the operation must pay attention to safety!
Circuit board drilling
The circuit board is to ｉｎｓｅｒｔ the electronic components, so it is necessary to drill the circuit board. According to the thickness of the electronic components of the pin to choose a different drill, drilling machine in the use of drilling, the circuit board must be stable, the rig speed can not open too slow, please carefully look at the operator operation.
Circuit board pretreatment
After drilling, with fine sandpaper to cover the toner on the circuit board polished, with water to clean the circuit board. After drying the water, with rosin painted on the side of the line, in order to speed up the rosin solidification, we use the hot air heater circuit board, just 2-3 minutes rosin can be solidified.
is focused on get PCB manufacturer, The best China PCB prototype, pcb fabrication for hobbyist, printed circuit board manufacture and other projects. even though in the rapid development of the project ,Jieduo state technology always stressed the balance between external opportunities and internal management, attaches great importance to the core competitiveness of enterprises to cultivate and shape. Our company take the value of customer service as the core competitiveness of enterprises, adhering to the honesty and integrity , the pursuit of excellence, respect individual for the corporate spirit, and strive to provide customers with integrity and reliable PCB Prototype.
Jieduo state technologyadheres to advance with the times and advocates to the service-oriented,faith-based, people-oriented management idea. With a belief of customer first to forge ahead , company insists on providing our clients with satisfying and best service ofturnkey PCB assembly,China PCB prototype,
在线联系供应商
Other supplier products
 |
9Perfect service Quick turn PCB assemblyis worth having | Shenzhen Jie Du State Technology Co., Ltd.is a PCB Manufacturingx19b6516n,Quick turn PCB assemblyin one large multi-functional integrated modern en... |
 |
PCBGOGOUnique Low volume PCB assembly industry preferred | Shenzhen Jie Du State Technology Co., Ltd. was founded in 10 years ago, After a period of rapid development, it has developed into a considerable s... |
 |
Jieduo state technologyPCB prototype, professional PCB prot | Shenzhen Jie Du State Technology Co., Ltd. is a professional company inPCB prototype manufacturer,electronic PCB assembly. Since its inception,with... |
 |
The best PCB Prototype + Electronic Component starting at | Shenzhen Jie Du State Technology Co., Ltd. was founded in 10 years ago, After a period of rapid development, it has developed into a considerab... |
 |
Jieduo state technologyfocus on Low volume PCB assemblycust | Shenzhen Jie Du State Technology Co., Ltd.is a company with electronic PCB assembly discount,Quick turn PCB assemblyx19b6516nandPCB Manufacturing a... |
Same products
 |
多哥细胞冷冻容器KGSQ液氮野外罐 | 卖方: 河南天之道生物科技有限公司 | 液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用... |
 |
White Fiberglass Surface, Packaging Type: Roll at | 卖方: Jiangsu Zeyusen Carbon Fiber Technology Co., Ltd. | Fiberglass surface mat is mainly used in the surface layer of fiberglass merchandise, it has th... |
 |
布隆迪细胞储存液氮容器 KGSQ 冷冻杜瓦瓶 | 卖方: Henan Tianzhidao Biological Technology Co., Ltd. | 液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用... |
 |
3x large magnifying glass with LED - evenly illuminates viewing area | 卖方: PHONEFIX technology Co.,Ltd | RECTANGULAR SHAPES THE WAY YOU NATURALLY READ: The rectangular lens is especially design to sim... |
 |
NDT3055L 3055L SOT-223 汽车电脑板 晶体管 | 卖方: 深圳维客修有限公司 | NDT3055L 3055L SOT-223汽车电脑板晶体管是现代汽车电脑维修中使用的关键部件。 作为一名技术精湛的手机维修专家，我了解确保所有组件顺利运行以保证汽车电脑系统的最佳性能和使用寿命... |
