Zhuzhou CityFilter equipment and accessoriesis worthy of yo

Henan Uters International CO.,LTDis a oil purifierx1dd01f6n,hydraulic oil filterin one large multi-functional integrated modern enterprise,and devote the high-quality Filter Assembly and first-class service for the masses of customers.

Henan Uters International CO.,LTD is specialized in Industry and agriculture,Manufacturing,Mechanical hardware processing since established in 10 years ago.So far,our company has established its branch companies in major cities throughout the country.Formed in North Third Ring Road,City area,Zhengzhou City,Henan Province,China as the center, the radiation sales system and service network.Details:Analysis of the noise caused by the failure of the hydraulic partsAnalysis of the noise caused by the failure of the hydraulic parts The failure of hydraulic components leads to noise and suction. It is one of the main reasons for the high noise of hydraulic pumps. The distributor of hydraulic pumps is also one of the most important components that easily cause noise. Here we will introduce in detail. 1. plunger pump or motor noise (1) the phenomenon of air suction is one of the main reasons for the high noise of the hydraulic pump. When the air is mixed into the air, it is easy to form cavitation phenomenon in its high pressure area and propagate in the form of pressure wave, resulting in oil oscillation, resulting in cavitation noise. The main reasons are as follows: (1) the oil filter of the hydraulic pump, the plugging of the inlet pipe or the high viscosity of the oil can cause the high vacuum at the inlet of the pump to make the air infiltrate. (2) the damage of the oil seal on the shaft end of the hydraulic pump, the pilot pump, or the bad seal of the inlet pipe, resulting in the air entry.The oil level of the oil tank is too low to make the hydraulic pump suck into the air directly.When there is high noise in the work of the hydraulic pump, the above parts should be checked first and the problem should be dealt with in time. (2) the internal components of the hydraulic pump excessive wear, such as piston pump cylinder and valve plate, the plunger and the plunger hole with pieces of the wear and tear, injury, make a serious leak in the hydraulic pump, when the hydraulic pump output pressure and flow pulsation will produce small flow oil, causing high noise. At this time, the deflection angle of the pilot system variable mechanism can be appropriately increased to improve the effect of internal leakage on the output flow of the pump. The servo valve spool and the flow control piston of the hydraulic pump will also cause the piston to fluctuate during the movement due to local wear and tear. It will cause the fluctuation of the output and pressure of the hydraulic pump, resulting in larger vibration and noise at the outlet of the pump. In this case, the brush plating and replacement can be done for the elements with serious wear and tension. (3) the flow plate of the hydraulic pump is also one of the most important components of the noise. Because of the surface wear or sludge deposition at the opening of unloading groove, the unloading slot will be shortened and the unloading position will be changed, resulting in the phenomenon of trapped oil, which will cause higher noise. During the normal repair process, the disc repaired by flat grinding will also have the consequences of shortening the unloading slot. If it is not properly slender in time, it will also cause great noise. During the assembly process, the large unloading groove of the distributor plate must be installed in the high pressure chamber of the pump, and the direction of its sharp angle must be opposite to the rotation direction of the cylinder block, otherwise, it will also bring great noise to the system. 2. hydraulic cylinder noise (1) the air in the oil liquid or the air in the hydraulic cylinder is not completely exhausted, and the cavitation phenomenon is produced under the action of high pressure, which causes large noise. At this time, the air must be exhausted in time. (2) the oil seal of the cylinder head is too tight or the piston rod is bent. In the process of movement, the noise will be caused by the strength of the cylinder. At this time, the oil seal or the straightening piston rod must be replaced in time. 3. pipe noise Too much pipe dead bending or fixed clip loosening can also produce vibration and noise. Therefore, arrangements should be in the pipeline to avoid dead corner Nagarze to loose to be timely tightening. Noise of 4. overflow valve The overflow valve is prone to generate high frequency noise, mainly due to the unsteady performance of the pilot valve, which is the noise generated by the air vibration caused by the high frequency oscillation of the pilot valve's front chamber. The main reasons are as follows: (1) the air is mixed with the oil, and the cavitation phenomenon is formed in the front of the pilot valve, which causes the high frequency noise. At this time, the air should be exhausted in time to prevent the air from reentering the outside world. (2) during the operation of the needle valve, excessive wear is caused by frequent opening. The conical valve and the valve seat can not be tightly closed, causing the noise of the pilot flow to be unstable and generate pressure fluctuations. At this time, it should be repaired or replaced in time. (3) the pressure regulating function of the pilot valve is unstable due to the fatigue deformation of the spring, which makes the pressure fluctuate and cause the noise, and the spring should be replaced at this time.

Adhering to the spirit of enterprise, UTERS bases on long-term development, technology as the core, market-oriented, and constantly open up new areas, undertaking to provide fast, high-quality service for the vast numbers of users. For further information about UTERSHydraulic Filters, please visit our official website: .

Other supplier products

	Low-cost, but high-grade precision filter	Henan Uters International CO.,LTDis a Gas separation filter,Metal Filtersin one large multi-functional integrated modern enterprise,and devote ...
	Lubricating oil filter,you can choose UTERSFILTER ELEMENTfo	Henan Uters International CO.,LTD is a professional company inLubricating oil filterx1dd01f6n,Filter Assembly. Since its inception,with innovative ...
	the Filter equipment and accessories and oil purifierof UTE	Henan Uters International CO.,LTDis a company with Filter housing the technical advantages,compressed air filterx1dd01f6nandCoalescer filter as...
	UTERSfocus online filter,OIL PURIFIERis goingto expand inte	Henan Uters International CO.,LTDreferred to as UTERS, is a professional engaged in line filterx1dd01f6n,OIL PURIFIER,FILTER CARTRIDGE,pleated ...
	Coalescer filterpreferred UTERS,its price is areasonable,ec	Henan Uters International CO.,LTD is a professional company inCoalescer filterx1dd01f6n,PRECISION FILTER. Since its inception,with innovative t...

供应产品

Same products

	多哥细胞冷冻容器KGSQ液氮野外罐	卖方: 河南天之道生物科技有限公司	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	White Fiberglass Surface, Packaging Type: Roll at	卖方: Jiangsu Zeyusen Carbon Fiber Technology Co., Ltd.	Fiberglass surface mat is mainly used in the surface layer of fiberglass merchandise, it has th...
	布隆迪细胞储存液氮容器 KGSQ 冷冻杜瓦瓶	卖方: Henan Tianzhidao Biological Technology Co., Ltd.	液氮罐的使用，覆盖科研、畜牧、美食、美容、冷冻配件等行业，但主要还是用于生物样本保存。 保存生物样本可细分为两大类，动物精液和实验细胞。两种用法适用容器不同，各有特色。冻精保存，要配圆提桶使用...
	3x large magnifying glass with LED - evenly illuminates viewing area	卖方: PHONEFIX technology Co.,Ltd	RECTANGULAR SHAPES THE WAY YOU NATURALLY READ: The rectangular lens is especially design to sim...
	NDT3055L 3055L SOT-223 汽车电脑板 晶体管	卖方: 深圳维客修有限公司	NDT3055L 3055L SOT-223汽车电脑板晶体管是现代汽车电脑维修中使用的关键部件。 作为一名技术精湛的手机维修专家，我了解确保所有组件顺利运行以保证汽车电脑系统的最佳性能和使用寿命...