.

Submersible Vertical High Pressure China Sand Suction Solid Sewage Slurry Pump

. Application and Features

Type SP/SPR pumps are vertical, centrifugal slurry pumps that are submerged in sump to work. They are
designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.

Wet parts of type SP pumps are made of abrasion-resistant metal.

All parts of type SPR pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particles.


The type with "L" is a series of sump pump with an extended shaft, which is suited for the working condition of the deeper lever. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.

Features

  • Flow passage components: this type of pumpuse wear-resistant metal, the impeller choose to wear-resistant metal or rubber.
  • Bearing components:we usegrease lubrication. According to the slag slurry pool, liquid height can choose different lengths of pump shaft or suction pipe.
  • Sealing: Doesn't need any shaft sealor shaft seal water. In suction volume, an insufficient conditions also can work normally below.


What are the operations and maintenance of the centrifugal pump?
1 Regularly observe and record the pump's inlet and outlet pressure gauge motor voltmeter, ammeter and bearing thermometer indication values, find abnormal phenomena, should analyze the reasons and deal with them in time.
2 Always listen to the internal sound with the listening needle, pay attention to whether there is friction or collision sound, and if the sound is significantly changed or has abnormal sound, stop the pump immediately.
3 Always check the lubrication of the bearing to see if the rotation of the oil ring is flexible, and its position and oil supply are normal.
4 The temperature rise of the bearing should not exceed 30~40 degrees, and the maximum temperature of the bearing should not exceed 70 degrees.
5 Check if the dripping of the pump packing seal is normal.
6 If it is a large-scale water pump with circulating oil supply, it should also be checked frequently whether the working condition of the oil supply equipment is normal and whether the bearing oil return is smooth.
7 When the bearing is cooled with cooling water, it should also be noted that the cooling water flow is normal.
8 bearing vibration of the running pump also needs to be monitored

Contact Us:

Kevin Liu/Mr.

Hebei Minerco Machinery & Equipment Co., LTD

P:

A: No. 12 Zhongshan Road Mancheng District, Baoding, Hebei, China

Web:



在线联系供应商

至: Hebei Minerco Machinery & Equipment Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Carbon Steel Body PTFE Lining Wafer Butterfly Valve with Pneumatic Actuator
Carbon Steel Body PTFE Lining Wafer Butterfly Valve with Pneumatic Actuator Product DescriptionThe valve is mainly used to cut off non-corrosive fluid. It is also can be designed to have the function of adjusting and cuttin...
Hot Seal Carbon Steel Hard Seal Double Flange 10 Inch Electric Butterfly Valve
Hot Seal Carbon Steel Hard Seal Double Flange 10 Inch Electric Butterfly Valve Product DescriptionThe valve is mainly used to cut off non-corrosive fluid. It is also can be designed to have the function of adjusting and cuttin...
Factory Water Supply 1inch Wog Nickel Plate Long Handle Brass Ball Valve
Factory Water Supply 1inch Wog Nickel Plate Long Handle Brass Ball Valve Product Description Factory Water Supply 1inch Wog Nickel Plate Long Handle Brass Ball Valve 1/2''-3'' inch Female BSP x Female BSP thread brass ba...
D Type China Manufacture High Pressure Multistage Horizontal Centrifugal Pump
D Type China Manufacture High Pressure Multistage Horizontal Centrifugal Pump Product DescriptionD type China manufacture high pressure multistage horizontal centrifugal pump D type pump is a horizontal, single-suction multi-...
Metal to Metal Sealed Floating Ball Valve for Hard Condition
Metal to Metal Sealed Floating Ball Valve for Hard Condition Product Description A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It i...
供应产品

Same products

Hydraulic Liner Hanger Sealling Assembly
Hydraulic Liner Hanger Sealling Assembly 卖方: SHANDONG SAIGAO GROUP CORPORATION Thesealing assembly comprises shell and pack off bushing and is used to seal the annular clearanc...
Optical glasses
Optical glasses 卖方: 浙江源腾眼镜有限公司 Quick Details Pattern Type: Solid Gender: Unisex Place of Origin: Zhejiang, China Brand Name: Y&a...
Optical glasses
Optical glasses 卖方: 浙江源腾眼镜有限公司 Quick Details Pattern Type: Solid Gender: Unisex Place of Origin: Zhejiang, China Brand Name: Y&a...
Optical glasses
Optical glasses 卖方: 浙江源腾眼镜有限公司 Quick Details Pattern Type: Solid Gender: Unisex Place of Origin: Zhejiang, China Brand Name: Y&a...
Optical glasses
Optical glasses 卖方: 浙江源腾眼镜有限公司 Quick Details Gender: Unisex Place of Origin: Zhejiang, China Brand Name: Custom brand Model Numb...