Cinnamoyl chloride

供应商: 726571


Molecular Formula:C9H7ClO

Molecular Weight:166.604 g/mol

Synonym:Cinnamoyl chloride;3-Phenyl-2-propenoyl chloride;3-Phenylpropenoyl chloride;



Density:1.1617 g/cm3 (20 C)

Melting point:35-37°C(lit.)

Boiling point:256-258°C(lit.)


Appearance:white or yellowish crystal

Storage temp:0-6°C

Partition Coefficient:3.19

Heat Of Vaporization:49.5 kJ/mol

Water-solubility:Soluble in petroleum ether, carbon tetrachloride and hot ethanol, insoluble in water. Slowly decompose in water.


Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Refrigerator (approx 4 C). Store protected from moisture.


Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.


Used as an intermediate in organic synthesis for the determination of trace moisture.

This product can be used as an intermediate in organic synthesis. Cinnamamide can be prepared by amidation, and n-cinnamyl -nphenylhydroxylamine can be prepared by interaction with phenylhydroxylamine. Cinnamyl chloride can also be used to synthesize the anti-inflammatory and analgesic drug Sinnoxicam (cinnoxicam) and other fine chemicals. A reagent for the determination of trace water.

Production preparation:

Cinnamyl chloride is obtained by the reaction of sodium cinnamate with acetyl chloride. The acetyl chloride and benzene are mixed into solution, and the dried sodium cinnamate is added several times under stirring from time to time. After each addition, the carbon dioxide is released and the next time is added. Then reflux for 2 hours. After a little cooling, the resulting sodium chloride and trace unreacted sodium cinnamate are filtered out. The filtrate was distilled to remove benzene at atmospheric pressure and then distilled at 131C (1.47kPa) to obtain the product in 75-90 yield. Carbon tetrachloride can be recrystallized when purification is needed. Cinnamyl chloride was prepared by the reaction of cinnamic acid with dichloro sulfoxide.

Polyvinyl cinnamate adhesive (PVAC,) is a linear polymer compound with molecular weight of 15000 ~ 20 000, which is obtained by esterification of polyvinyl alcohol and cinnamyl chloride. The photosensitive adhesive was prepared by adding 5-nitroacenaphthene and organic solvent cyclohexanone, that is, the double bond of the molecule was opened and solidified under ultraviolet light irradiation. It has important applications in the manufacture of integrated circuits and micro components. A photoresist, polyvinyl cinnamate, synthesized from polyvinyl alcohol and cinnamyl chloride in a pyridine solvent. The prepared photoresist is called KPR.. The photochemical dimerization of the double bond of cinnamate was formed under the action of ultraviolet light, and it was turned into an insoluble substance. KPR was the first photoresist used in photolithography, and 5-nitroacenaphthene was usually added as Guang Min. Photoresist, also known as photoresist, can be used in photolithography, which is widely used in printing and electronic industry. Its working principle is that the light part is crosslinked to form the insoluble hardening film, which is processed into negative image (negative glue), or the original insoluble glue becomes soluble after illumination, and is processed as a positive image (positive glue).


至: 726571
Your E-mail:

Send to other suppliers

Other supplier products

3-Chlorocinnamic acid
3-Chlorocinnamic acid First Aid Measures Ingestion Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert...
2-Fluorocinnamic acid
2-Fluorocinnamic acid Molecular Weight: 166.15 Melting point:178-180 °C(lit.) Boiling point: 281.6°C at 760 mmHg Density:1.285 g/cm3 Flash point:124.1 °C Ap...
isobutyl cinnamate
isobutyl cinnamate Molecular Weight: 204.2649 Boiling point: 296.7°C at 760 mmHg Density:1.019 g/cm3 Flash point:157.2°C Refractive index:(20°C)1.553 EINE...
Hydrogenated cinnamic acid
Hydrogenated cinnamic acid Molecular weight: 150.17 EINECS number: 207-924-5 Purity: ≥98% Packing specification: 25 kg / packaging Use limit: FEMA (mg / kg): beverage 0.0...
P-Hydroxycinnamic Acid
P-Hydroxycinnamic Acid Molecular Weight: 164.16 EINECS: 231-000-0 Purity: ≥99% Appearance: White or light yellow powder Density: 1.07 Melting point: 218-221℃ Solubilit...

Same products

Factory producer manufacturers ITACONIC ACID 99.6% MIN lubricant oil paper coating pharmaceuticals
Factory producer manufacturers ITACONIC ACID 99.6% MIN lubricant oil paper coating pharmaceuticals 卖方: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. Properties:Itaconic Acid (also called Methylene Succinic Acid) is a white crystalline carboxylic ...
Manufacturer supply textiles leather fur CAS NO 107-13-1 Methacrylamide 99% MIN for industrial
Manufacturer supply textiles leather fur CAS NO 107-13-1 Methacrylamide 99% MIN for industrial 卖方: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. CAS NO.:107-13-1 Molecular formula:C3H3N Methacrylamide is used as a raw material in the producti...
Methyl Methacrylate(MMA)
Methyl Methacrylate(MMA) 卖方: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. 【Application】 Methyl methacrylate is polymethylmethacrylate (PMMA) monomer. It is also copolymer...
Diethylene glycol glycol ether CAS DETB 99%)C9H20O3
Diethylene glycol glycol ether CAS DETB 99%)C9H20O3 卖方: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. DETB is an excellent solvent with low toxicity. Because it has two groups with strong solubility ...
Well sell Acrylamide98%
Well sell Acrylamide98% 卖方: SHANDONG CROWNCHEM INDUSTRIES CO., LTD. CAS NO.:79-06-1 Molecular formula:C3H5NO Application: Mainly used to produce a variety of copolym...