Petroleum products sulfur content analyzer (Coulomb's law) FDR-3106
Product Name: (X-ray method) sulfur content analyzer
Product Model: FDR-3201 Quantity: Minimum Order Quantity: 1 Buy
Tags: sulfur content, sulfur content, X-ray spectrometry,
Scope
Petroleum products sulfur content analyzer (X-ray spectrometry) is designed and manufactured in accordance with the requirements specified in the standard of the People's Republic of China GB/T11140, GB/T17040, ASTM D4294, the instrument for the determination of the trace sulfur content of petroleum products. Because it uses physical analysis, analysis speed, without complex sample preparation, high precision, human error, operatives low labor intensity, no pollution, it has been widely used in the international and basically replace other sulfur measurement methods of analysis. Features
1, using a Chinese operating system, man-machine-friendly interface that.
2, the detection time is short, test results automatically within 30 seconds; Automatic C / H ratio correction, suitable for a variety of samples;
3, large-screen LCD display, automatic print measurement data;
4, the use of X-ray tube excitation, the instrument can be used long-term, regardless of source attenuation;
5, using the method of physical analysis, the analysis does not contact, and does not destroy the sample, without the chemical reagent;
6, the instrument with integrated design, easy maintenance;
Technical parameters
1, the scope of analysis: S analytical range can be adjusted by calibration curve method selected.
2, the width of the scope of analysis: S max-S%% min ≤ 9.999%; such as oil: S: 0.001 to 9.999%.
3, the inherent error, the accuracy of analysis: such as oil: in line with the national standard GB / T 17040, also comply with the relevant requirements of the American National Standards ASTM D4294.
4, system analysis time: 1 ~ 999 seconds, the recommended value is 60 seconds.
5, the detection limit: 10ppm
6, using the conditions: Ambient temperature: 5 to +40 ° C, relative humidity: ≤ 85% (30 ° C) Power supply: 220V ± 20V, 50Hz.
7 Total power consumption: <150W.
Other supplier products
|
|
FGC-1070气相色谱仪 |
主要特点
通过各种反馈网络中使用自己的专利技术，电机控制电路，分立元件，自动反馈跟踪电机控制信号，有效地提高了电机的精确控制，保证了泵的可靠性和稳定性
首次引入光纤光谱探测器的设计，保证了波长的准确性，提高了精度。
智能化程度高，可实现网络监控平台，以提高你的质量控制的效率。
自动化，... |
|
|
FDH-1402发动机油表观粘度测定仪（CCS) |
产品介绍
适用范围发动机油表观粘度测定仪适用标准：GB/T6538 ASTM D5293 该仪器主要测试发动机油的低温动力粘度指标，采用当代先进技术，集机械、光学电子及计算机技术于一体，进行温度测量，恒温控制。控温精确、稳定。发动机油表观粘度测定仪结构合理，性能稳定，操作简单，是理想的分析检测... |
|
|
沥青延伸度测定仪 FDL-0231 |
FDL-0431 Asphalt Rolling Thin Film Oven (85 Type)
Application range
Asphalt Rolling Thin Film Oven is in accordance with the national industr... |
|
|
Automatic Cleveland Open-Cup Flash Tester FDT-0131 |
lubricant liquid rust meter FDT-0701
Comfirm to SH/T0193, ASTMD2272
Also applied to assess the other oils, such as hydraulic oil, cycle oil, an... |
|
|
Liquid petroleum products, hydrocarbons analyzer FDR-3411 |
FDH-0171 Oxidative stability tester of steam turbine oil (rotating pressure vessle method)
1, lubricating oil oxidation stability analyzer (rotary... |
供应产品
Same products
