GGD Capacitance Compensation Cabinet
GGD Capacitance Compensation Cabinet
Most load types in power system belong to inductive load. In addition, power electronic devices are widely used in power enterprises, so the power factor of power grid is low. Lower power factor reduces equipment utilization ratio, increases power supply investment, damages voltage quality, reduces equipment service life, and greatly increases line loss. In order to improve the energy waste caused by the low power factor of power grid and these unfavorable factors of power supply production, it is necessary to effectively improve the power factor of power grid. Obviously, it is unreasonable and usually impossible for these reactive power to be supplied by generators and transmitted over long distances. Reasonable way is to generate reactive power where reactive power is needed, that is, to increase reactive power compensation equipment and devices.
Generally speaking, low price Capacitance Compensation Cabinetis composed of cabinet shell, bus, circuit breaker, disconnector, thermal relay, contactor, lightning arrester, capacitor, reactor, primary and secondary conductor, terminal row, power factor automatic compensation control device, panel instrument, etc.
In the actual power system, most of the loads are asynchronous motors. The equivalent circuit can be regarded as a series circuit of resistance and inductance. The phase difference between voltage and current is large and the power factor is low. After shunt capacitors are connected, the current of capacitors will offset part of the inductance current, so that the inductance current decreases, the total current decreases, the phase difference between voltage and current decreases, and the power factor increases.
A reactive power automatic controller is installed in the compensation cabinet, which automatically puts in or removes capacitors according to the load force rate. The main function of the controller is to make the load close to the required reactive current, thereby improving the power factor. For enterprises, the main reason is to avoid the penalty of power factor not up to the standard (0.9).
Ⅳ. Main Technical Indicators of
Rated operating voltage: AC380V + 15%
Rated operating frequency: 50Hz
Overload capacity: 120%, 1 minute
Switching frequency: 3.2 kHz (average)
Corresponding time: <10ms
Power loss of the device: When rated at full load, the loss does not exceed 2% of the compensation capacity.
Fifty harmonics and less can be filtered.
Manual and automatic tracking control
Noise: <60dB (1 meter away from device 1)
Protection Level: IP30
Structural Requirements: The cabinet body is installed on the ground with a length * width * height (mm) of 1000 * 1000 * 2260.
One-time Intake: Down Intake
Man-machine interface: Chinese display operation interface.
The following documents and annexes shall be provided for supply:
Hot sale various high quality GGD Capacitance Compensation Cabinet, 50Hz Capacitance Compensation Cabinetfrom China leading manufacturer. Our products are efficient, cost effective and deliver more benefits. Welcome to choose us!
在线联系供应商
Other supplier products
|
|
GGD Capacitance Compensation Cabinet | GGD Capacitance Compensation Cabinet Most load types in power system belong to inductive load. In addition, power electronic devices are widely use... |
 |
WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch | WSD-VZF(R)-27 Handcart Indoor High Voltage Vacuum Load Switch Overview Main uses and scope of application WSD-VZF(R) -27/630-25 removable vacuum lo... |
 |
WSD-FLW34-24 SF6 load switch | WSD-FLW34-24 SF6 load switch WSD-FLW34-24 SF6 load switch is suitable for outdoor three-phase AC distribution systemwith rated voltage of 24 kV and... |
 |
Intelligent Transmission and Distribution Automation System | Intelligent Transmission and Distribution Automation System This product is the monitoring unit of the overhead line power grid. It cooperates with... |
 |
KYN28-24 Indoor AC Metal Armored Pull-out Switchgear | KYN28-24 Indoor AC Metal Armored Pull-out Switchgear KYN28A-24 indoor AC metal armoured pull-out switch cabinet is suitable for three-phase AC 50/6... |
