.

The gap error between AAK hydraulic cartridge valve and valve block was reduced to 2 μ M-3 μ m, and the order quantity of American customers increased

The gap error between the hydraulic cartridge valve and the valve block produced by AAK was reduced to 2μm-3μm, and the sealing oil effect surpassed 95% of its peers. The order volume of American customers increased from 30% to 50%, and there was no quality complaint.

Because of being used to the domestic market, most manufacturers lack a certain awareness of the precision of the products, especially the gap between the hydraulic cartridge valve and the valve block. Once the gap is too large and oil leakage is unavoidable. The 95% of the hydraulic valve manufacturers in the conventional market can only achieve 8μM-10μm, and the sealing effect is just general. After six months of use, the hydraulic system will appear slight Oil leakage phenomenon, this is why many hydraulic cartridge valve use shelf life generally stay in 6 months.

Before March, Lisa, an American customer, purchased a batch of hydraulic valves of different models from our company and another factory at the same time. A few days ago, she sent an to inform another factory that the hydraulic valves produced by another factory had slight oil leakage, which led to the failure of pressure and flow regulation. She asked us about the last shipment, if there will be similar problems. We don't think so. I told him that in order to save cost, 95% of the products produced by manufacturers can only control the fit gap error between 8μm and 10μm, which leads to the inconsistency of the product's normal use and shelf life. Lisa was skeptical and tested 10 samples from another factory, and the gap error was mostly about 8μM-10μm. At the same time, she also tested and compared the parameters of our samples, and the results showed that the fit gap of our products was 2-3μM. Seeing such big difference and in order to ensure the service life of the products, Lisa increased the order quantity from 30% to 50%. So far, there has been no quality complaint.

Under the premise of normal use, the shelf life of AAK hydraulic valves can generally be controlled for 1-2 years, they are mainly equipped with skilled production masters and advanced production equipment. At the same time, each product is debugged by the R & D team before production, and large-scale production is arranged only after the parameters are tested to be qualified. This is why the gap between AAK hydraulic valve and valve block can be controlled within 2-3μM, and also what most peers lack.

For high quality sealing effect, AAK can save you a lot of costs, don't hesitate, welcome to try!



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

美国老客户转单后液压阀漏油,AAK帮忙解决后他又回来了
美国老客户转单后液压阀漏油,AAK帮忙解决后他又回来了 AAK生产的液压阀使用丁腈橡胶密封圈,密封性超过绝大多数同行,即使市场竞争再激烈,也没有老客户转单,唯独合作六年之久的美国客户Tom,为扩大供应商范围而转单,结果发生漏油,重新回来找AKK帮忙,现在他似乎不敢再转单了。 对于液压阀密封圈的选择,绝大多数的厂家采用硅胶密封圈,此材质抗拉性能好、耐...
AAK液压阀,对液压油的选用提出建议
AAK液压阀,对液压油的选用提出建议 对于处在油性介质中的液压阀来说,油品选择是至关重要,俄罗斯客户接受AAK油品使用意见,顺利挽回了用户的信任。 油品的好坏也会影响产品的使用寿命,目前市场上很多用户使用HL32号液压油,它具备循环系统的润滑,并且价格便宜,同时能延长换油周期,与机器油相比平均能节约润滑油1/3-1/2,因此成为...
AAK液压阀使用40Cr做阀套材质,顺利补救意大利客户液压市场
AAK液压阀使用40Cr做阀套材质,顺利补救意大利客户液压市场 与90%的液压阀厂家不同,AAK液压阀阀套使用40Cr材质,不会出现卡顿现象,及时挽救了客户David在意大利的液压阀市场,而我司也逐渐成为他的主力供应商。 阀套材质的选择,直接关系液压阀的各种表现。国产1214钢材易切削、产量高,同时对加工刀片的损耗比较小,目前绝大多数同行为了节省成本...
AAK液压阀劳动态度端正,确保质量与货期,加州客户不想找第二个供应商
AAK液压阀劳动态度端正,确保质量与货期,加州客户不想找第二个供应商 Although AAK hydraulic valve factory is equipped with high-precision imported CNC lathes and a lot of small-scale processing equipment, the output ...
AAK液压阀采用进口压簧,俄罗斯客户经多家对比后下单百万美金
AAK液压阀采用进口压簧,俄罗斯客户经多家对比后下单百万美金 AAK液压阀早已采用韩国琴钢丝作为液压阀的压簧,而同行中仅有几家工厂在用,俄罗斯客户来我厂定制样品后回国,经过半年的多家样品比对,AAK液压阀力克国内外竞争对手,至今已获得累计百万美金的订单。 液压阀在使用一段时间后出现压力无法调节,是比较常见的问题,液压阀内部弹簧品质的优劣,直接关系到液压...
供应产品

Same products

AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China
AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China 卖方: AAK INDUSTRY CO., LTD AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in ChinaFe...
AAK液压阀劳动态度端正,确保质量与货期,加州客户不想找第二个供应商
AAK液压阀劳动态度端正,确保质量与货期,加州客户不想找第二个供应商 卖方: AAK INDUSTRY CO., LTD Although AAK hydraulic valve factory is equipped with high-precision imported CNC lathes and a lo...
AAK液压阀品质超过90%的同行,顺利挽回了客户的外贸大客户
AAK液压阀品质超过90%的同行,顺利挽回了客户的外贸大客户 卖方: AAK INDUSTRY CO., LTD AAK所生产的高压节流液压阀,品质超过90%的同行,让广东某外贸公司挽回了一个外贸大客户。关键在于我们AKK采用了瑞士进口的高精密加工设备,目前约有不到10%的同行拥有此设备。 现在的液压阀...
4次打样3次更换材料,AAK获HydraForce插装液压阀大订单
4次打样3次更换材料,AAK获HydraForce插装液压阀大订单 卖方: AAK INDUSTRY CO., LTD 历时两年,先后3次更换材料,4次重新打样,最终通过参数测试,获得HydraForce插装液压阀大订单, 从国内众多液压阀供应商中脱颖而出,与HydraForce代理公司达成合作,成为HydraF...
AAK液压阀零泄漏,俄罗斯客人每2个月返单
AAK液压阀零泄漏,俄罗斯客人每2个月返单 卖方: AAK INDUSTRY CO., LTD AAK所生产的液压阀做到了零泄漏,因为每个液压阀都经过试压台的检验无误后,才包装入箱。90%的同行因没有配备试压台,在不经试压检测的情况下,直接包装了出货,因而问题连连。而AAK液压阀已进入业界...