Sintered Neodymium Magnets
Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces. Examples of applications include permanent magnet motors, loudspeakers, magnetic separators, wind power generators, computer hard drive, and MRI devices.
For more technical information of our sintered neodymium magnet, please refer to the sections of Technological Advantages, Demagnetization Curve, Grades, Magnetic Properties, Physical Properties, Magnetic Parameters, Surface Treatment, Magnetization Orientations.
Technological Advantages
High Coercive Force
Highest Intrinsic coercive force Hcj≥35kOe
High Consistency
CPK of Remanence (Br) and Intrinsic coercive force (Hcj)>1.67
Low Reversible Temperature Coefficient
αBr=-0.08%/℃, βHcj=-0.4%/℃
Low Weight Loss
130℃, humidity 100%, vapor pressure 2.7bar, 20days, average weight loss<2mg/cm2
Grades
The Grade of a magnet generally indicates how "strong" a magnet material is, which is measured by the Maximum Energy Product. The energy product is commonly specified in units of Gauss Oersted. The higher the grade the "stronger" the magnet. The grade also tells the temperature rating of a magnet material. Neodymium magnets have different heat tolerances which determine their maximum working temperature. As the heat tolerance increases the maximum available flux density decreases.
Notes:
Surface Treatment
As Neodymium magnet is prone to corrosion, it is usually preferable for the magnet to be coated for protection. Among a variety of options for coatings, nickel and nickel-copper-nickel are the most commonly used, making the magnet more corrosion resistant and durable.
Magnetization Orientations
Magnets can be delivered magnetized and un-magnetized. Some production methods require the magnets being incorporated into assemblies in a un-magnetized state and magnetized later once the assembly is completed. There are various magnetic orientations available for different shapes of magnets.
We also provide rubber coated super magnets, rubber coated rare earth magnets, rubber coated magnets for saleand so on.
在线联系供应商
Other supplier products
Countersunk/Counterbore Pot Magnets | Neodymium Magnets with Countersunk Holes: Material SinteredNeodymiumIronBoron,Steel Dimensions ... | |
Channel Magnets2019 | Cchannel magnetsspecifications Material SinteredNeodymiumIronBoron,Steel Dimensions Length PullForce 28lbs—900lbs Mag... | |
Magnetic Assemblies | Magnet assemblyincorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achiev... | |
Channel Magnets2019 | Specifications of threaded rod magnets Material SinteredNeodymiumIronBoron,Steel Dimensions Diameter PullForce 5lbs—900lb... | |
Grade N42 Neodymium Disc Magnets D10*3mm | This powerful neodymium disc magnet measures 10mm in diameter, 3mm in thickness, with the pull force of 3.45kg vertically. It is made from an alloy... |
Same products
Pin Magnets | 卖方: NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD | Pin magnet for office use in a range of whiteboards, refrigerators and other magnetic surfacesand... | |
Neodymium Pot Magnet | 卖方: NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD | The magnetic core in a pot magnet is neodymium material, also called rare earth pot magnet. High ... | |
Neodymium Magnet with Countersunk Holes | 卖方: NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD | Neodymium magnet with countersunk holes -- magnet made from neodymium has a countersunk hole and ... | |
Neodymium Ball Magnet | 卖方: NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD | Strong NdFeB ball magnets also called buck balls, like our other super magnets, are made of a spe... | |
Metal Plate | 卖方: NINGBO SOUWEST MAGNETECH DEVELOPMENT CO.,LTD | Metal Plate Material Metal plates are used as spacers for mounting magnetic filter bars or other... |