Cooling Tower Filling For BAC
BAC cooling tower filling is one of the most important parts of the heat exchange process of the cooling tower. It is also the main part to improve the efficiency of cooling tower and ensure the economy and safe operation. The surface of specially designed packing is an S-shaped ladder-shaped ripple, with good heat dissipation performance, low ventilation resistance, durability, flame retardant, and other advantages. It is widely used in different types of large, medium, and small cooling towers.
Description of Cooling Tower Filling for BAC
Specification and model: overall dimension: 1330 * 245mm
Spacing: 20 mm
Thickness: 0.3-0.4mm
Applicable temperature: 75 ℃ ~ 35 ℃
Scope of application: square cross flow cooling tower
Parameter Of Cooling Tower Filling for BAC
|
Module Length (Max) |
mm |
4070 |
|
Module Width |
mm |
1330 |
|
Module Depth |
mm |
— |
|
Flute Height |
mm |
19 |
|
Flute Corrugation Angle |
degrees |
－ |
|
Surface Area |
m2/m3 |
150 |
|
Sheet Thickness - Before Forming |
mm |
|
|
Sheet Thickness - After Forming |
mm |
|
|
°C |
60 |
|
|
°C |
80 |
Advantage Of Cooling Tower Filling for BAC
BAC cooling tower filling is easy to install, easy to clean, and easy to transport. The heat dissipation filling is adhesive type, easy to install and easy to clean, and successfully solves the problem of deformation caused by a large amount of attached scale and self-weight, and the scale after deformation is more serious and difficult to clean. The results show that the flame retardant oxygen index of the filler is more than 40. The structure design has the function of diversion.
BAC cooling tower filling has accurate positioning and equal spacing combination (all 15mm), which is convenient to form a large area of flowing water film perpendicular to the surface of the water flow and promote the contact surface of large airflow. The built-in vertical deflector makes the distribution of gas water ratio in the filling uniform and reasonable. The unique and efficient water remover and filling molding are integrated, which can effectively remove the water droplets in the hot and humid air and return to the tower, and the cooling tower is large The loss of floating water is greatly reduced. The floating water loss rate is less than 0.001%.
As a professional cooling tower suppliers, we provide bac cooling tower parts, bac cooling towers,cooling tower for sale, contact us to buy china cooling toweror know more.
在线联系供应商
Other supplier products
 |
Cooling Tower Air Inlet Louvers | The cooling tower air inlet louver is also called air inlet grille, which is used to replace the air inlet shutter of the old cooling tower. The ai... |
 |
Cooling Tower | As an industrial cooling tower manufacturer, AUVC can provide different types of china cooling towerparts. Using high-quality raw material which is... |
 |
Cooling Tower Drift Eliminator | Zhejiang Aoshuai Refrigeration Co., Ltd. is a professional cooling tower companythat supplies FRP cooling towerand cooling tower spare parts. Indus... |
 |
40 Ton Cooling Tower | Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the packing from top to b... |
 |
40 Tr Cooling Tower | 40 Tr Cooling Tower Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the ... |
Same products
 |
Cooling Tower Motor | 卖方: Zhejiang Aoshuai Refrigeration Co., Ltd | Cooling tower motoris a new type of energy-saving and environmental protection improved motor, wi... |
 |
Cooling Tower Air Inlet Louver For Mesan | 卖方: Zhejiang Aoshuai Refrigeration Co., Ltd | The sectional louver made from light-weight corrosion-free PVC sections offers easy access to col... |
 |
Cooling Tower Gearbox | 卖方: Zhejiang Aoshuai Refrigeration Co., Ltd | The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is genera... |
 |
Cooling Tower Float Ball | 卖方: Zhejiang Aoshuai Refrigeration Co., Ltd | The cooling tower float ball, also called the float valve, is designed at the bottom of the pool.... |
 |
Cooling Tower Filling For Gea | 卖方: Zhejiang Aoshuai Refrigeration Co., Ltd | GEA filling is made of corrugated PVC sheet, which can obtain maximum strength by solvent welding... |
