.

AAK hydraulic valve with imported piano steel wire spring, another purchaser helps the company to recover customers

Last year, Pushkin, a Russian hydraulic valve buyer, always had the problem of automatic pressure regulation failure on the hydraulic valves he purchased from Guangdong, China, and received many complaints from customers. However, the problem could not be solved 100% by the original supplier. That's really upsetting Pushkin. If not deal with it properly, he will not only lose the job, but the company also has the risk to lose all customers.

For this type of situation, it is most likely the problem of the spring of the hydraulic valve, because for the hydraulic valves with spring by using carbon steel, after repeated use, the resilience of the spring will gradually weaken, resulting in the hydraulic valve pressure and flow regulation failure. The nature of carbon steel is with high carbon content and high hardness, but its plasticity and toughness will be reduced, at the same time, the tensile strength will be weakened, resulting in poor stability, which will affect the adjustment of hydraulic valve. As the hydraulic valve is always in operation, once the spring has a problem, the whole hydraulic system will be paralyzed. The carbon steel is currently the cheapest one and also easy to purchase. In order to save cost and facilitate production, at present, 90% of the manufacturers take carbon steel as the first choice for the spring material, which is already a common phenomenon in the industry.

In order to keep the customers, Pushkin is in urgent need of looking for new suppliers. During this half month in Zhejiang Province, we were introduced to him by friends. After visiting our whole workshop, he took out a draft and asked us to process several samples for him at his cost. Three months later, we received some information from him and also an order for hydraulic valves. At the beginning, he not only asked our company to proofing. In the past three months, he mainly tested the samples of each company, every component and the entire hydraulic system. Finally, besides our company, there was also another company that met his requirements. However, there is a little gap on the internal spring tension test parameters for the hydraulic valves made by our company and another factory. Therefore, he did not hesitate to place the order with AAK.

AAK hydraulic valve has always used the piano steel wire compression spring imported from South Korea. This material has the characteristics of high strength, good elasticity, fatigue resistance, creep resistance and toughness, smooth and clean surface and strong anti rust ability. At the same time, it has the specified tensile strength and torsion performance, and the surface is not allowed to have cracks, folds, scabs, cracks and corrosion etc.

Since last year, Pushkin has purchased hydraulic valves with imported piano steel wire spring from our company for over 530,000 US dollars. Since the use of AAK hydraulic valves, Pushkin has stabilized its old customers without worrying about customers' complaints and returns. Meanwhile, the market reputation is getting better and better. His frequency of returning home and abroad has also decreased, and he has spent more time in Russia.

AAK hydraulic valves, buy at ease, more ease of use!



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

American customers accept the suggestion to use HM46 hydraulic oil and tested an order for AAK hydraulic valve finally
American customers accept the suggestion to use HM46 hydraulic oil and tested an order for AAK hydraulic valve finally Logan, an American customer, recently purchased a batch of hydraulic valves, but problems came out within the shelf life period. In previous years,...
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and no oil leakage, a customer in Netherlands placed orders
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and no oil leakage, a customer in Netherlands placed orders Jensen is the purchasing manager of a hydraulic valve company in the Netherlands. Recently, he has received continuous complaints. The oil seal eff...
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and there is no oil leakage, a customer in Netherlands placed two orders
The oil seal clearance of AAK hydraulic valve is 3 times smaller than that of the peers and there is no oil leakage, a customer in Netherlands placed two orders Jensen is the purchasing manager of a hydraulic valve company in the Netherlands. Recently, he has received continuous complaints. The oil seal eff...
AAK液压阀零泄漏,俄罗斯客人每2个月返单
AAK液压阀零泄漏,俄罗斯客人每2个月返单 AAK所生产的液压阀做到了零泄漏,因为每个液压阀都经过试压台的检验无误后,才包装入箱。90%的同行因没有配备试压台,在不经试压检测的情况下,直接包装了出货,因而问题连连。而AAK液压阀已进入业界前10的行列。 90%的中小液压阀工厂要么不配备试压台,要么将试压台当作摆设。试压台测试过程确实比...
AAK hydraulic valve has no leakage, an American customer placed the first order for 100,000 US dollars
AAK hydraulic valve has no leakage, an American customer placed the first order for 100,000 US dollars The roughness of the mounting surface of the hydraulic valve will seriously affect the leakage of the hydraulic system. The roughness Ra of most fa...
供应产品

Same products

XSM1系列液压马达,用于矿山工程绞车
XSM1系列液压马达,用于矿山工程绞车 卖方: 宁波鑫灿液压传动有限公司 XSM系列电动机是基于意大利技术的多年经验的结果,并且结合了旨在提高电动机机壳强度和内部动态组件的负载能力的技术的多种设计变型。结果是一系列具有高连续额定功率的电动机,这既是因为减少了内部比重,...
ADH4500系列3-4.5T螺旋钻驱动装置用于紧凑型挖掘机附件钻孔螺旋钻驱动
ADH4500系列3-4.5T螺旋钻驱动装置用于紧凑型挖掘机附件钻孔螺旋钻驱动 卖方: 宁波鑫灿液压传动有限公司 ...
XSM05系列径向柱塞液压驱动轮马达挖泥船和钻机用固定排量液压马达
XSM05系列径向柱塞液压驱动轮马达挖泥船和钻机用固定排量液压马达 卖方: 宁波鑫灿液压传动有限公司 XSM系列电机是基于意大利技术多年经验的结果,并且结合了许多关于旨在增加电机外壳强度和内部动态组件负载能力的技术的设计变化。结果是一系列具有高连续额定功率的电机,这都是因为内部特定负载的减少,并...
AAK hydraulic valve inner hole does not wear and deformation, orders come one after another
AAK hydraulic valve inner hole does not wear and deformation, orders come one after another 卖方: AAK INDUSTRY CO., LTD After some search, Mr. Chen found that the material of 45 steel is soft and easy to wear. Even a...
AAK guarantees the quality, quantity and delivery, Andreas has saved a major customer with sales of 1.2 million US dollars
AAK guarantees the quality, quantity and delivery, Andreas has saved a major customer with sales of 1.2 million US dollars 卖方: AAK INDUSTRY CO., LTD Andreas is a purchaser of a hydraulic cartridge valves company in Germany, he has been successful...