.

AAK液压阀使用丁腈橡胶做密封圈,Ron获得总部授权现场下大单

Ron is one of the purchasers of an American hydraulic valve company in East China. A batch of hydraulic valves was released in June this year. The company's after-sales director told him that nearly 40% of consumers complained about the poor sealing and obvious oil leakage of the hydraulic valves. Ron was very surprised that he had not changed the factory, and the quality had not gone wrong in previous years. How could such a low-level error occur this time? He knew that if the problem could not be solved fundamentally, he would be fired.

In order to find out the reason, Ron visited many manufacturers and learned that most of the manufacturers used silicone sealing rings in order to save costs due to the rapid rise of materials recently. This material has good tensile properties, high temperature resistance, no deformation, and good sealing and waterproof properties, but the biggest problem is that it is not resistant to oil and acid. However, because of the strong tensile strength and convenient assembly of the silicone sealing ring, the assembly efficiency of the whole hydraulic valve is very high. In order to save the cost, many manufacturers take the silicone sealing ring as the first choice.

When Ron realized that the factory had secretly changed the materials, he was extremely disappointed and decided to replace the old factory with a new one. Ron saw our website on the Internet and found that there were nitrile rubber sealing rings in the introduction of each product, which was different from other manufacturers. He was curious and sent us an asking why our sealing ring is different from most factories. We suggested that he buy more than 10 samples, test the parameters himself first to approve the quality, and send them to the U.S. headquarters. Ron was pleased that the headquarters was very satisfied with the quality of the samples and immediately provided them to customers for trial use. A week later, the headquarters received positive feedback from users, which was very good. Ron's hanging heart finally settled down and the problem was solved.

AAK hydraulic valve mainly uses NBR sealing ring. This material not only has high temperature resistance, good adhesion, and corrosion resistance, but also mainly oil resistance, acid resistance, waterproof and anti-aging. It is the first choice for sealing the hydraulic system. At the same time, we can also according to the customer's requirements for different use scenarios of the hydraulic valve, specially match the sealing ring with different media to reach the standard of zero oil leakage. This is why many new and old customers choose to cooperate with us, not easy to change suppliers.

One month later, Ron visited our company. He was very impressed by our comprehensive professional knowledge and determination of quality. And thanks to us for recovering at least 40% of its losses last time, and now the purchase volume of those old users has increased by nearly 30% over the same period. What's more, he signed a cooperation agreement with us for the whole year, with a purchase volume of US$800,000. He told me quietly that the headquarters was very satisfied with him and trusted him, so that he had the opportunity to place large orders on site.

AAK hydraulic valve, is very strict to quality, looking forward to your trial order!



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

AAK Hydraulic Pressure Valve Has a Service Life of More Than 1 Million Times, Becoming the Preferred Manufacturer of a British customer for Parker Series Hydraulic Valves
AAK Hydraulic Pressure Valve Has a Service Life of More Than 1 Million Times, Becoming the Preferred Manufacturer of a British customer for Parker Series Hydraulic Valves AAK Hydraulic Pressure Valve Has a Service Life of More Than 1 Million Times, Becoming the Preferred Manufacturer of a British customer for Parker ...
AAK液压阀零泄漏,俄罗斯客人每2个月返单
AAK液压阀零泄漏,俄罗斯客人每2个月返单 AAK所生产的液压阀做到了零泄漏,因为每个液压阀都经过试压台的检验无误后,才包装入箱。90%的同行因没有配备试压台,在不经试压检测的情况下,直接包装了出货,因而问题连连。而AAK液压阀已进入业界前10的行列。 90%的中小液压阀工厂要么不配备试压台,要么将试压台当作摆设。试压台测试过程确实比...
4次打样3次更换材料,AAK获HydraForce插装液压阀大订单
4次打样3次更换材料,AAK获HydraForce插装液压阀大订单 历时两年,先后3次更换材料,4次重新打样,最终通过参数测试,获得HydraForce插装液压阀大订单, 从国内众多液压阀供应商中脱颖而出,与HydraForce代理公司达成合作,成为HydraForce插装液压阀第一供应商。 目前国内液压阀行业出现一种很普遍的现象“卖门面&rdq...
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000 AAK relief valve strictly controls the roundness error of oil sealing surface within 0.005 - 0.01mm, so as to avoid unbalanced force of pressure re...
AAK relief valve has no pressure loss, saving VIP customer for a Spanish client
AAK relief valve has no pressure loss, saving VIP customer for a Spanish client AAK relief valve has no pressure loss, saving VIP customer for a Spanish client The relief valve hydraulic system produced by AAK has pressure for...
供应产品

Same products

AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order
AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order 卖方: AAK INDUSTRY CO., LTD AAK hydraulic valve has a proprietary valve block anti-rust treatment technology. A special coati...
The Inner Hole Accuracy of AAK Hydraulic Valve Is Controlled At 1μm, Making The Business of American Customer Soar 3 Times
The Inner Hole Accuracy of AAK Hydraulic Valve Is Controlled At 1μm, Making The Business of American Customer Soar 3 Times 卖方: AAK INDUSTRY CO., LTD The Inner Hole Accuracy of AAK Hydraulic Valve Is Controlled At 1μm, Making The Business of Am...
AAK Uses 5 More Processes to Ensure That The Valve Block Is Free of Iron Filings, Which Satisfies The American Customer After Testing The Sample
AAK Uses 5 More Processes to Ensure That The Valve Block Is Free of Iron Filings, Which Satisfies The American Customer After Testing The Sample 卖方: AAK INDUSTRY CO., LTD AAK Uses 5 More Processes to Ensure That The Valve Block Is Free of Iron Filings, Which Satisfies...
Factory Can Not Even Achieve The Valve Spool Ra Value at 0.16μm, but AAK Has Already Mass Produced Hydraulic Valves 5 Times Finer Than It
Factory Can Not Even Achieve The Valve Spool Ra Value at 0.16μm, but AAK Has Already Mass Produced Hydraulic Valves 5 Times Finer Than It 卖方: AAK INDUSTRY CO., LTD Factory Can Not Even Achieve The Valve Spool Ra Value at 0.16μm, but AAK Has Already Mass Prod...
6 Proofing Can Not Solve the Horn Hole, but AAK Hydraulic Flow Valve Has already been Solved Successfully
6 Proofing Can Not Solve the Horn Hole, but AAK Hydraulic Flow Valve Has already been Solved Successfully 卖方: AAK INDUSTRY CO., LTD 6 Proofing Can Not Solve the Horn Hole, but AAK Hydraulic Flow Valve Has already been Solved Succ...