.

AAK Hydraulic Valve ensures 0.8 μm accuracy and no leakage. A Spanish customer is enthusiastic and placed the re-peat order

AAK Hydraulic Valve ensures 0.8 μm accuracy and no leakage. A Spanish customer is enthusiastic and placed the re-peat order

The roughness of the mounting surface below 0.8μm has always been the mandatory quota of AAK Hydraulic Valve to against leakage. By controlling the roughness of the seal ring and the mounting surface, and adjusting the parameters, the mounting surface is grinded for many times to ensure that leakage is avoided until every AAK hydraulic valve is not likely to leak. The roughness of the mounting surface can be controlled below 0.8μm, which is difficult for domestic peers to achieve.

Juan is the purchasing director of a Spanish hydraulic valve company in China market. One of his regular customers increases the orders by more than 30% every year. Some time ago, the old customer gave him an order with high precision requirements, and the roughness of the mounting surface of the hydraulic valve should be less than 0.8μm. According to his current understanding, the roughness of installation surface in Chinese factories is generally between 0.9-1.0 μm, which is difficult to meet the requirements of the customer. He did not dare to refuse the order from this old customer, but also worried about the quality not meeting the requirements, so he was in a dilemma.

Juan asked all his suppliers, but no factory could guarantee this accuracy. At the moment of hesitation, Juan contacted us through the introduction of a factory, and expressed his concerns and the customer's requirements for the product. I also explained to him that 95% of domestic manufacturers often neglect the accurate grinding of the mounting surface of hydraulic valves, resulting in rough surface of products produced, the roughness values of mounting surface are usually 1.2μm, 1.0μm, or 0.9μm etc. The control range fluctuates and cannot be stabilized in a standard range, which leads to the weakening of sealing during the installation process. Once the roughness is not well controlled, the leakage will increase, and then affect the normal operation of the whole hydraulic system. It is a critical value for the roughness of the mounting surface to reach 0.8μm, which is also lacking in the technology of many manufacturers.

Juan bought 5 samples from our company and went back to do parameter testing. 15 days later, Juan sent his order to us. After repeated confirmation, we were advised that his customer was very satisfied with our product parameters. Before placing the order, the customer repeatedly stressed that the production should strictly follow the standard of the samples and designated our factory to produce the order for him.

It's been two months since we delivered the goods to Juan. Last week, he sent AAK a repeat order for $80,000, and told me that since the use of AAK hydraulic valve with surface roughness less than 0.8μm, this old customer has sent him more and more inquiries for the high-precision hydraulic valve, which has also led to the increase of orders for other hydraulic valves. Now the order volume in a quarter is more than twice that in the same period. Now the boss is paying more and more attention to him, and he is working harder and harder.

The high precision AAK hydraulic valve guarantees the accuracy of 0.8μm and no leakage, which makes the domestic peers despair.



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

After inspection failure, Pablo communicated for 6 times and sourced for new factories for 4 days, but no gain. AAK Hydraulic Valve solved his problem with quality goods in 25 days
After inspection failure, Pablo communicated for 6 times and sourced for new factories for 4 days, but no gain. AAK Hydraulic Valve solved his problem with quality goods in 25 days After inspection failure, Pablo communicated for 6 times and sourced for new factories for 4 days, but no gain. AAK Hydraulic Valve solved his prob...
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes Kaden, a hydraulic valve purchaser from the United States, has been successfully purchasing hydraulic valves from China in recent years, and his bo...
Bruce contacted 15 factories but gained nothing, finally AAK met his requirements for the high precision hydraulic sequence valve
Bruce contacted 15 factories but gained nothing, finally AAK met his requirements for the high precision hydraulic sequence valve Bruce contacted 15 factories but gained nothing, finally AAK met his requirements for the high precision hydraulic sequence valve Today, we receive...
AAK HYDRAULIC VALVE Never Cheat, Steven Doesn't Want to Find a Second Supplier
AAK HYDRAULIC VALVE Never Cheat, Steven Doesn't Want to Find a Second Supplier AAK HYDRAULIC VALVE factory is equipped with high-precision imported CNC lathes and honing machines, designed many small fixtures and special proce...
Meticulously production attitude, American customer finally chose to cooperate with AAK
Meticulously production attitude, American customer finally chose to cooperate with AAK Meticulously production attitude, American customer finally chose to cooperate with AAK 5 years ago, Mike was the backbone of a hydraulic valve co...
供应产品

Same products

The hardness of 65HRC valve spool impressed German customer, who repeated the order for AAK hydraulic valves nearly 5 times the quantity
The hardness of 65HRC valve spool impressed German customer, who repeated the order for AAK hydraulic valves nearly 5 times the quantity 卖方: AAK INDUSTRY CO., LTD The valve spool hardness of AAK hydraulic flow valves reached 65HRC, the German customer Felix wa...
The ± 1 μ M error of inner hole accuracy convinced a Spanish customer, who repeated order for AAK hydraulic pressure valve 3 times a year
The ± 1 μ M error of inner hole accuracy convinced a Spanish customer, who repeated order for AAK hydraulic pressure valve 3 times a year 卖方: AAK INDUSTRY CO., LTD Gerrard, a Spanish hydraulic customer who just repeated the order at the end of May, repeated ano...
After encountering Waterloo, Andy turned the tables at AAK, and repeated an order for hydraulic flow control valve yesterday
After encountering Waterloo, Andy turned the tables at AAK, and repeated an order for hydraulic flow control valve yesterday 卖方: AAK INDUSTRY CO., LTD Just yesterday, I received a repeat order from Andy for a hydraulic flow control valve, which is ...
The 6th Proofing Successfully Matched The Quality of German Sample, Eaton Placed A Hydraulic Pressure Control Valve Order with AAK
The 6th Proofing Successfully Matched The Quality of German Sample, Eaton Placed A Hydraulic Pressure Control Valve Order with AAK 卖方: AAK INDUSTRY CO., LTD It took 3 months and 6 proofing adjustments to match the sample quality of hydraulic pressure con...
The Hydraulic Pressure Reducing Valve With A Service Life of Only 3 Months Is Completely Different After AAK Took Over The Order
The Hydraulic Pressure Reducing Valve With A Service Life of Only 3 Months Is Completely Different After AAK Took Over The Order 卖方: AAK INDUSTRY CO., LTD Recently, I received the second re-order of a hydraulic pressure reducing valve from French clien...