.

Bruce contacted 15 factories but gained nothing, finally AAK met his requirements for the high precision hydraulic sequence valve

Bruce contacted 15 factories but gained nothing, finally AAK met his requirements for the high precision hydraulic sequence valve

Today, we received the third order from Bruce team. Bruce is the purchaser of a French hydraulic valve company. Last August, he had orders for several types of sequence valves. Because the accuracy requirements of sequence valve are very high, in Zhenhai, Ningbo, the hometown of hydraulic valve, he checked with no less than 15 factories, but the parameters of their hydraulic valve can not meet the requirements. He selected 3 hydraulic valve factories who has the parameters closest to the requirements. However, the samples of these sequence valves are either of different quality, or can not pass the parameter test. It took him more than 40 days, but none of the factories can reassure him.

He was frustrated. In Mid-September, he saw our website by chance. With doubt, he ed us to ask about the parameters of the hydraulic valve. After a few rounds of communication, he felt that maybe AAK hydraulic valve could do it. Later, he sent a detailed drawing of the sequence valve, with every detail of the sequence valve, the media, and the use scenarios. He also asked us to make samples. It was the first time for us to see such detailed drawing of hydraulic valve.

After receiving the sample of AAK sequence valve, Bruce team spent 15 days on testing and comparing the samples. The test results gave their team hope, all the parameters meet the standard, but the tightness of the sequence valve is still a little uneasy. They asked if AAK can still make improvements. We were also a little surprised that there was a problem with the sealing performance, because no guest has ever complained about the sealing performance of the AAK hydraulic valve. After doing many tests on the samples we kept on hand, we found that the NBR seal ring is not suitable for this kind of sequence valve. After 3 trials, it is determined that the fluororubber seal ring is the perfect match for this sequence valve. After they received revised samples of AAK sequence valve, we received the order for this series of sequence valve from Bruce within 1 week.

Many factories can do sequence valve, but few hydraulic valve factories can really meet the requirements of some special customers for the high-precision hydraulic quality. Many hydraulic valve manufacturers simplified the production process, leading to uneven quality, it is basically a one-time business. Coincidentally, in recent years, we AAK Hydraulic Valve, with guaranteed quality and quantity, the spirit of craftsmen to overcome difficulties, and the sincere service details, has been 100% recognized by our customers. Many old customers have constantly introduced new customers to us. For 8 consecutive years, there has been no quality return. Perhaps there is no second factory like this in Ningbo.

AAK hydraulic factory is not only equipped with high precision CNC lathe imported from Switzerland, but also import the core materials from South Korea and Germany, with our own proprietary hydraulic technology, never cutting corners, quality control is more QC than the customer's QC, AAK hydraulic valve, it worth you a try for purchasing.



在线联系供应商

至: AAK INDUSTRY CO., LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

AAK cartridge valve has unique skills to avoid horn hole during cartridge hole processing
AAK cartridge valve has unique skills to avoid horn hole during cartridge hole processing AAK cartridge valve has unique skills to avoid horn hole during cartridge hole processingThe geometric tolerance of the cavity hole of the cartridg...
American customers accept the suggestion to use HM46 hydraulic oil and tested an order for AAK hydraulic valve finally
American customers accept the suggestion to use HM46 hydraulic oil and tested an order for AAK hydraulic valve finally Logan, an American customer, recently purchased a batch of hydraulic valves, but problems came out within the shelf life period. In previous years,...
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with the solution, and then uses the instantaneous impact...
The filtration accuracy reaches 10%μM hydraulic valve, Dutch customer can’t buy it anywhere else except AAK
The filtration accuracy reaches 10%μM hydraulic valve, Dutch customer can’t buy it anywhere else except AAK The filtration accuracy reaches 10%μM hydraulic valve, Dutch customer can’t buy it anywhere else except AAK Patrick is a hydraulic valve ...
AAK液压阀
AAK液压阀 简介:我司主要致力于生产各种液压阀块、压力控制阀、螺纹插装阀等液压产品,拥有完善的加工配套设备,成熟的生产工艺及专业的设计团队。我司自创立以来,一直秉承“质量第一”、“客户至上”的服务理念,产品不但供应国内市场,并远销欧、美、亚等国家和地区,深受...
供应产品

Same products

More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago
More Than 10 Manufacturers unable to avoid Iron Filings in Hydraulic Valve Block, But AAK Mass Produced It a Year Ago 卖方: AAK INDUSTRY CO., LTD Maarten purchased a batch of hydraulic valve blocks some time ago. In the early test, the system ...
AAK Hydraulic Pressure Valve Has No Horn Hole, Which Saved US$80,000 Order for Adair
AAK Hydraulic Pressure Valve Has No Horn Hole, Which Saved US$80,000 Order for Adair 卖方: AAK INDUSTRY CO., LTD AAK hydraulic pressure valve has no horn hole. In Ningbo, the hydraulic valve production base, fe...
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes
Few Manufacturers Have URMA Reaming Technology, But AAK Hydraulic Valve Has And Makes High-precision Multi-stage Spool Holes 卖方: AAK INDUSTRY CO., LTD Kaden, a hydraulic valve purchaser from the United States, has been successfully purchasing hydra...
The Damping Hole of AAK Pressure Valve does Not Block, Colin Transferred Order to AAK The Next Day
The Damping Hole of AAK Pressure Valve does Not Block, Colin Transferred Order to AAK The Next Day 卖方: AAK INDUSTRY CO., LTD AAK pilot hydraulic pressure valve adds welded high-strength filter screen at the inlet section o...
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes
AAK Hydraulic Valve Block Has Unique Deburring Skills, American Customer Sent US$20,000 Inquiry Sheet Within 20 Minutes 卖方: AAK INDUSTRY CO., LTD AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with th...