.

AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China

AAK hydraulic valve spool never leaks, customer promoted to head of Spain headquarters in China

Fernado is a purchaser from a Spain company, responsible for its company's hydraulic valve procurement project in China. This time, he suffered a big setback. For a batch of hydraulic valves using domestic 1214 steel as valve core, more than 60% of the products have oil leakage after being used for about 6 times. In the last week, 72 complaint calls have been received, and even more direct requests for return of goods have been made. The headquarter requested him to give solutions within half a month. Fernado, however, was confused and at a loss.

In order to find out the cause of the oil leakage, Fernado immediately transferred nearly 50 products from the warehouse for parameter testing, and finally found that there was indeed a widespread oil leakage phenomenon. He learned that although 1214 steel made in China is an easy cutting material, due to the brittleness of the material, the slight deformation caused by careless heat treatment to the valve core, can not be found and picked out. In order to save costs, many manufacturers do not do any inspection and directly assemble and use, which leads to the problems in the use of the products.

Occasionally, he saw our company's information on the Internet, and contacted us with the mentality of trying. After listening to his intention, we picked some products by using 40Cr material as the valve core, and conducted pressure test for many times on the spot. There was no oil leakage phenomenon at all. Fernado's face is full of heavy relief when he saw the parameter list. Fernado took a video on the spot, wrote a comparison report, and sent an to the headquarters. On the third day, we received a small trial order from him, mainly to replace the stocks with problems.

All the hydraulic valves produced by AAK use 40Cr as the main raw material of valve core, which is pressure resistant, wear-resistant and not easy to deform. At the same time, after heat treatment, the surface toughness is better and the fatigue resistance is stronger. Although the material price and cost is higher than 1214 steel, it can completely solve the problem of oil leakage, this is what many manufacturers lack.

After the oil spill problem was solved, Fernado gained the absolute trust of the headquarters, so he was promoted to be the main procurement leader in China. At the same time, the volume he purchased from our company has also increased year by year. We have cooperated with him for three years, and the average annual purchase is stable at about 1.2 million euro.

AAK hydraulic valve uses 40Cr steel as the raw material for the valve core, which never leak, this is absolutely different from other manufacturers.



Send product request

To: AAK INDUSTRY CO., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Cliff Was Stunned! AAK Delivered The Urgent Order of The Hydraulic Diverter Valve From The Global Top 500 Enterprises 10 Days in Advance
Cliff Was Stunned! AAK Delivered The Urgent Order of The Hydraulic Diverter Valve From The Global Top 500 Enterprises 10 Days in Advance Cliff is a purchaser of a hydraulic valve company in the United States. He began to contact the domestic hydraulic valve industry in China a few ye...
AAK hydraulic valve uses nitrile rubber as sealing ring, Ron is authorized by the headquarters to issue large orders on site
AAK hydraulic valve uses nitrile rubber as sealing ring, Ron is authorized by the headquarters to issue large orders on site Ron is one of the purchasers of an American hydraulic valve company in East China. A batch of hydraulic valves was released in June this year. The ...
AAK professional hydraulic valve sealing ring, zero leakage to ensure your safety
AAK professional hydraulic valve sealing ring, zero leakage to ensure your safety AAK professional hydraulic valve sealing ring, zero leakage to ensure your safety Yesterday, we received an from an American client that he saw s...
The fit clearance between AAK valve and valve sleeve is 30% smaller than peers, the Portuguese customer orders half a year later
The fit clearance between AAK valve and valve sleeve is 30% smaller than peers, the Portuguese customer orders half a year later AAK strictly controls the fit clearance between the valve and the inner hole of the valve sleeve. For hydraulic valves with valve diameter less tha...
AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order
AAK Hydraulic Valve Block Has Unique Anti-rust Technology, Russian Customer Tried A Small Order AAK hydraulic valve has a proprietary valve block anti-rust treatment technology. A special coating with a thickness of 0.02 ~ 0.03 mm is plated on...
All supplier products

Same products

AAK Hydraulic Valve Block Is 100% Burr Free, Which help Chase get out of dilemma resulted from 4 Proofing Failures
AAK Hydraulic Valve Block Is 100% Burr Free, Which help Chase get out of dilemma resulted from 4 Proofing Failures Seller: AAK INDUSTRY CO., LTD Chase is the purchaser of a hydraulic valve company in the United States. The purchase of hydraul...
Forged Hydraulic Cylinder Head
Forged Hydraulic Cylinder Head Seller: Hebei Golden-hammer forgings co., ltd Product: forged hydraulic cylinder head Application: hydraulic cylinder Place of origin: Hebei,...
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000
AAK relief valve has never had a squeal problem. Dutch customer issued their first order for $60,000 Seller: AAK INDUSTRY CO., LTD AAK relief valve strictly controls the roundness error of oil sealing surface within 0.005 - 0.01...
AAK hydraulic valve has no leakage, an American customer placed the first order for 100,000 US dollars
AAK hydraulic valve has no leakage, an American customer placed the first order for 100,000 US dollars Seller: AAK INDUSTRY CO., LTD The roughness of the mounting surface of the hydraulic valve will seriously affect the leakage of...
The pressure spring of hydraulic valve was assembled after 3 times of selecting, and AAK became the exclusive supplier of a Russian customer
The pressure spring of hydraulic valve was assembled after 3 times of selecting, and AAK became the exclusive supplier of a Russian customer Seller: AAK INDUSTRY CO., LTD The pressure spring used in AAK hydraulic valve is selected for 3 times, and then assembled into ...