.

AAK hydraulic valve on the selection of steel is extremely harsh, saving one after another foreign trade customers

AAK hydraulic valve for each part of the steel selection is extremely demanding, which beyond customer's imagination. Only in this point, we've run over most of our peers.

In the face of increasingly fierce competition in the hydraulic valve market, the simplest way to break through is to cut corners on materials. Many hydraulic valve peers use crooked ideas on raw materials, such as using limited 45 steel, which is soft and easy to wear. Even after heat treatment, the hardness can not meet the parameter requirements. Therefore, it is only applicable to the parts with light stress and less wear points, but many manufacturers are in the opposite direction, leading to serious uneven quality on the market.

Some manufacturers use 45 steel in spring seat, valve sleeve, and even more in valve core. Some time ago, Mr. Liu, from a foreign trade company in Shenzhen, came to us with a sample of relief valve. Through our inspection, we found that the inner hole of the product was worn and deformed seriously, not to mention the valve core. Moreover, he told us that 90% of the products from this batch were of this kind.

The price quoted by the original manufacturer is even lower than the cost of the product. Due to only comparing the prices, the foreign trade company ignored the quality of the products. The original tips of quality comparison among the three manufacturers has already changed into the price comparison. This factory uses 45 steel, the hardness can not meet the requirements, although the price is cheap, but the wear and tear of the products will certainly shorten the service life. We took out similar products for comparison. We could see the difference only from the appearance. Mr. Liu also made a careful comparison and material inspection and analysis, and finally understood the tricks. He said on the spot that we would be his first choice for the inquiry of hydraulic valves in the future.

As an old Chinese saying goes, in addition to skilled foundry masters, excellent raw materials are also the foundation of excellent quality sword casting, both are indispensable. Coincidentally, hydraulic valve is also the same, especially for steel selection. AAK is very strict in the selection of steel. We use 40Cr steel most. After heat treatment at appropriate temperature, it achieves excellent comprehensive mechanical properties in terms of toughness, plasticity and wear resistance, and enhances the fatigue resistance and hardenability of the products. Especially for the surface hardening treatment such as high frequency quenching and tempering, AAK has its own proprietary technology.

Is there any question about the quality of AAK hydraulic valve? If yes, it's normal. Then the comparison of product test is needed, there is no value without comparison, we especially welcome customers to make comparison.



Send product request

To: AAK INDUSTRY CO., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

AAK hydraulic valve adopts imported spring. Russian customer orders millions of dollars after comparing with many other companies
AAK hydraulic valve adopts imported spring. Russian customer orders millions of dollars after comparing with many other companies AAK hydraulic valve has already used Korean harp steel wire as the pressure spring of hydraulic valve, while only a few factories in the same indus...
AAK Hydraulic Valves, Suggestion about how to choose Hydraulic Oil
AAK Hydraulic Valves, Suggestion about how to choose Hydraulic Oil For hydraulic valves in oily medium, oil selection is very important. Russian customers accepted AAK's suggestion on the selection of hydraulic oil...
An old American customer transferred the order and the hydraulic valve leaked oil. After AAK helped solve the problem, he came back again
An old American customer transferred the order and the hydraulic valve leaked oil. After AAK helped solve the problem, he came back again The hydraulic valves produced by AAK use nitrile rubber sealing ring, which has better seal performance than most of the peers. Even though the mar...
The gap error between AAK hydraulic cartridge valve and valve block was reduced to 2 μ M-3 μ m, and the order quantity of American customers increased
The gap error between AAK hydraulic cartridge valve and valve block was reduced to 2 μ M-3 μ m, and the order quantity of American customers increased The gap error between the hydraulic cartridge valve and the valve block produced by AAK was reduced to 2μm-3μm, and the sealing oil effect su...
AAK hydraulic valve has zero leakage and Russian customers order back every 2 months
AAK hydraulic valve has zero leakage and Russian customers order back every 2 months The hydraulic valves that AAK produced have zero leakage because each valve has been tested correctly on the test bench before it is packed into th...
All supplier products

Same products

Hydraulic valve service life longer than 90% more of the peers, the American customer decided to place order with AAK after comparison
Hydraulic valve service life longer than 90% more of the peers, the American customer decided to place order with AAK after comparison Seller: AAK INDUSTRY CO., LTD The high-pressure throttle hydraulic valve produced by AAK, the service life can be longer than 9...
An old American customer transferred the order and the hydraulic valve leaked oil. After AAK helped solve the problem, he came back again
An old American customer transferred the order and the hydraulic valve leaked oil. After AAK helped solve the problem, he came back again Seller: AAK INDUSTRY CO., LTD The hydraulic valves produced by AAK use nitrile rubber sealing ring, which has better seal perfo...
AAK hydraulic valve on the selection of steel is extremely harsh, saving one after another foreign trade customers
AAK hydraulic valve on the selection of steel is extremely harsh, saving one after another foreign trade customers Seller: AAK INDUSTRY CO., LTD AAK hydraulic valve for each part of the steel selection is extremely demanding, which beyond cus...
AAK hydraulic valve using 40Cr as valve sleeve material, successfully remedy the Italian Customer hydraulic market.
AAK hydraulic valve using 40Cr as valve sleeve material, successfully remedy the Italian Customer hydraulic market. Seller: AAK INDUSTRY CO., LTD Different from 90% of the hydraulic valve manufacturers, AAK hydraulic valve sleeve is made of 40...
IPRV Series Inlet Pressure Regulator
IPRV Series Inlet Pressure Regulator Seller: SHANDONG DOFUN REFRIGERATION TECHNOLOGY CO.,LTD IPRV Series Inlet Pressure Regulator inlet pressure regulatordescription The product has the func...