.

JMZ-T Rubber Vibration Damping Sandwich Mounts

The JMZ-T series rubber sandwich mountsis the new designed model, which is designed especially for the military use. Comparing with the wire rope isolators, this model is small and tinny, which has no worrying about the space limits.

The max static load of the JMZ-T Series anti vibration rubber sandwich mountsis from 1.4 kg to 2.8 kg, which can be specially used in a good deal of precision equipment and system in helicopter, motor, embedded electronics, etc.

The JMZ-T Series vibration damping sandwich mountsand vibration sandwich mountscan also be used in the very narrow spaces to meet the mountable environmental requirements. The rubber sandwichnew type friction damper is the very selection for the limits of the space under some special situations.

An earthquake is caused by the motion of the ground which causes the forced vibration of a building that is still at rest on the ground, resulting in internal forces, deformation and displacement in the structure. Vibrational isolation is an isolated earthquake, To isolate or dissipate vibration energy by setting a control mechanism at the base or at a certain location of buildings and structures to avoid or reduce the transmission of vibration energy to the upper structure, reduced the vibration response of the structure, so that only minor motion and deformation of the building can be realized during the earthquake to ensure the safety of buildings. In isolation technology, foundation isolation technology is a hot new technology in the world. The base isolation technology is widely used, it is especially suitable for medium-and low-rise brick-concrete buildings and reinforced concrete buildings.

What is the basic vibration isolation technology

Traditional vibration isolation structure mainly utilizes plastic deformation and energy dissipation of the main structure to dissipate vibration energy after yielding,therefore, the performance requirements of these regions are particularly important. Once these areas have problems due to certain factors, it will affect the vibration resistance of the structure seriously, even produce serious damage. And the foundation isolation is to set a layer of isolation with sufficient reliability between the superstructure of the building and the top of the foundation to separate the superstructure from the foundation, and blocks the propagation of vibration waves to the superstructure, so that the vibration energy of the input structure is absorbed by the energy dissipation elements of the isolation layer, therefore, it will reduce the vibration response of the superstructure greatly, so that ensure the safety of the building.

The basic principle of base isolation technology

According to the experiment, if the period of the structure is prolonged and a large damping is given, it will greatly reduce the acceleration response on the structure. At the same time, large displacements to the structure can be provided by an isolation layer between the bottom of the upper structure and the top of the foundation. In this way, the superstructure will move close to translation during the earthquake, so the safety degree of the superstructure is greatly improved, which is the principle of base isolation. It is shown in the curve of the structural reaction spectrum below. From the acceleration response spectrum of figure (a), we can see that the acceleration response of the structure decreases with the prolongation of the period, so that the inertia force acting on the structure is reduced; but from the displacement response spectrum of (b), the period is prolonged and the displacement response is increased. If a damping device is introduced into the structure, the displacement response of the structure can be reduced, and the corresponding acceleration response can also be reduced.

Wire rope shock mountare comprised of stainless steel stranded cable threaded through aluminum retaining bars that are mounted for effective shock and vibration isolation.

With the corrosion resistant, all-metal construction, the GRY marine shipbuilding vibration mounts are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone, and abrasives.



Send product request

To: Xi\'an Hoan Microwave Co., ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount Why is rubber used as vibration absorber? Rubber vibration isolator is the most widely used vibration isolator, it is widely used in various fields...
Anti Vibration Mount
Anti Vibration Mount From the 1970s, the technology of anti-vibration mounts is applied to the project construction of bridge, road, and railroad. Contact deformation, ...
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts
JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts JMZ-1-3.0A rubber isolation mounting feetbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has ...
GH-30G Anti Vibration Shock Mounts For Military Defense
GH-30G Anti Vibration Shock Mounts For Military Defense Wire rope isolators are also calledshock and vibration mountswhich are comprised of stainless steel stranded cable threaded through aluminum retain...
GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone
GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone The GRY-5A marine shipbuilding camera vibration isolation mountis made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. Th...
All supplier products

Same products

Cored Wire
Cored Wire Seller: Henan Frontsteel Silicon Industry Co., Ltd. Specifications:SiCa/ CaFe/ SiCaBa/ C Cored WireShape:Usage:SteelmakingParticle size:Packaging:Rol...
PVC Dense Wire
PVC Dense Wire Seller: Shijiazhuang Sairui Metal Product Co., Ltd Small coiled wire, small coiled iron wire Small coiled wire Finely arranged wire Name: Garde...
Galvanized Stranded Wire
Galvanized Stranded Wire Seller: Shijiazhuang Sairui Metal Product Co., Ltd Product Description Plunged wire: Plunged wire can be called plied binding wire, , which is ma...
Black Annealed Iron Wire
Black Annealed Iron Wire Seller: Shijiazhuang Sairui Metal Product Co., Ltd Product Description Process:Roll the hot metal billet into a 6.5mm thick steel bar, that is, a...
Galvanized Wire
Galvanized Wire Seller: Shijiazhuang Sairui Metal Product Co., Ltd Product Description The galvanizing process is to coat the ordinary iron wire we see daily wit...