STANDARD FIBER OPTICAL CERAMIC FERRULE
What is a ceramic ferrule?
Ferrule plays a significant role in Fiber Connectors as well as Fiber Patchcord. With the characteristics of low insertion loss required for optical transmission, a low value in elasticity coefficient, excellent strength and high resistance to changeable environments, the ceramic ferrule is usually used in optical connectors.
Having the high durability and the highest levels of dimensional control, these kinds of optical ferrulesare available to all fiber applications designated in TIA/EIA-568-B.1 cabling architecture standards. Ceramic ferrule, which is essentially zirconia materials, owns brilliant control over the size. This kind of optical fiber ferrules enables efficient polishing with greater repeatable geometry and a finer surface finish. Proper fiber alignment in zirconia ceramic ferrulesis assured through state-of-the-art precision molding/machining of the ferrule ceramicto ensure full contact of fiber ends.
Fiber Ferrule Types
As one of the professional ceramic ferrule manufacturerin China, T&S sells a great variety of ceramic ferrules with consistent quality.
Ceramic ferrule manufacturer
Being made of zirconia ceramic, our Standard Ceramic Ferrules are well known for their highest performance and durability of all ferrule material types. It is usually used as sub-components in fiber optic connectors, in certain cases, it can also be integrated into various specialized applications.
As an experienced ceramic ferrule manufacturer, all of our fiber optic ferrules are precision manufactured strictly according to rigid quality standards.
Our high precision standard zirconia fiber ferrules are designed for high reliability and performance. Available ferrule types are SC, ST, LCferrule, MU, SMA with flat, PC, cone, step, or pre-angled end-faces.
Standard Optical Fiber Ceramic Ferrule FAQs
What is the core free grade B ferrule?
The connector made of this kind of fiber ferrulecan directly meet the requirements of grade B connector random matching without tunning. The grade B connector made of this kind of fiber optic ferruleshas great advantages in cost and performance.
How to detect the concentricity of optical ferrule?
Generally, there are two types, one is contact type (probe detection), the other is non-contact (optical detection). In the early stage, it is mainly probe detection. At present, the mainstream plug-in manufacturers use optical detection. Compared with the probe detection, the optical detection accuracy is higher, the IL correspondence between the selected plug and connector is better, and the secondary pollution can be effectively avoided.
Standard for ceramic ferrule?
YDT 1198.1-2014 technical specification of ferrule for optical fiber connector part 1: ceramic ferrule
How many grades are there in the standard fiber optic ferrule?
SM can be divided into three grades: A / B / C, in which A / B / C level fiber optic ferrules corresponds to grade A / B / C connectors. MM has not been classified.
What is the bending strength of ceramic ferrule?
SC / LC requirement ＞ 1200Mpa
Send product request
Other supplier products
 |
PLC TYPE WDM | Instead of taking a thin film filter to mux or demux wavelengths, PLC type achieves the same goal by using chip PLC, which uniformly divides and gu... |
 |
25G SPF28 AOC Cable | 25G SPF28 AOCCable T&S Communication TSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28for 25 Gigabit Ethernet and Infiniband... |
 |
10G SFP+ DAC | SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 3... |
 |
QSFP28 100G CWDM4 10KM | QSFP28 100G CWDM4 10KM The QSFP28 100G-CWDM4-10km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for... |
 |
AOC / DAC / TRANSCEIVER | Along with passive optical components, active optical components are indispensable elements of an optical network. TScommunicationadopts unique tec... |
Same products
 |
Steel Fibers For Crack Control | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Steel Fibers For Crack Control Why we use steel fiber for cracking control? The steel fiber... |
 |
Orivision H.264 8 Channels 4K@30 HDMI Video Encoder 1U | Seller: Nantong ZYDZ Electronic Co., Ltd. | Brand: ORIVISION Model: ZY-EH408 Input Interface: HDMI*8, Audio*8 Output Interface: RJ45... |
 |
Orivision DVI Extender Over Fiber | Seller: Nantong ZYDZ Electronic Co., Ltd. | ORIVISION’s DVI optical extender transmit AV and RS-232 control signals or USB over long di... |
|
|
STANDARD FIBER OPTICAL CERAMIC FERRULE | Seller: T&S COMMUNICATIONS CO., LTD. | What is a ceramic ferrule? Ferrule plays a significant role in Fiber Connectors as well as Fiber ... |
 |
MT FERRULE | Seller: T&S COMMUNICATIONS CO., LTD. | The MT ferruleis a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pi... |
