Tabular Alumina
Tabular Alumina, with the purity, do not add any additives, and firing contraction completely finished sintered alumina, alumina powder as raw material, after fine grinding, molding, drying, for ultra high temperature furnace with the temperature below the melting point of corundum, quick heat cooling fast under the condition of burning, to form a number of closely with columnar crystal, with high purity,high melting point, grains high hardness, heat load of high strength, low shrinkage, high density and low permeability, good wear resistance, good thermal shock stability etc.
Tabular Alumina:
|
Usage |
Specification |
Chemical composition （%） |
Bulk Density (g/cm3) |
Apparent Porosity（%） |
||||
|
Al2O3 |
Na2O |
Fe2O3 |
SiO2 |
|||||
|
Refractory |
Size |
0-1mm 1-3mm 3-5mm 5-8mm |
≥99.0 |
≤0.35 |
≤0.2 |
≤0.2 |
≥3.5 |
≤5.0 |
Send product request
Other supplier products
 |
Brown Fused Alumina for Precision Casting | Brown Fused Alumina for Precision Casting Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumin... |
 |
Calcined Kaolin | Calcined Kaolin: Calcined Kaolin is representative of high quality hard clay in China. After calcined , Al2O3contents about 44-46%, Fe2O3contents 2... |
 |
Zirconia Fused Alumina | Zirconia Fused Alumina is smelted in the high temperature with Zirconia sand as the main raw material. Its characteristics are good tough texture, ... |
 |
Ceramic Foundry Sand | Ceramic Foundry Sand with the high quality bauxite as the raw material, blowing into the ball after remelting smelting, is a new type of steel cast... |
 |
Alumina based sintered mullite | alumina based Sintered Mullite is made of high-quality alumina powder by special process and sintered at high temperature. The product has the char... |
Same products
 |
Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 | Seller: Zhengzhou HAIXU Abrasives | Casting ceramic sand AFS30 AFS35 AFS40 AFS45 AFS50 Ceramic Foundry Sand is a corundum based cast... |
 |
98% SiC refractory sand F012 F014 F016 silicon carbide | Seller: Zhengzhou HAIXU Abrasives | 98% SiC refractory sand F012 F014 F016 silicon carbide Product Introduction Black silicon carbi... |
 |
Black silicon carbide F014 F016 for ductile iron foundry | Seller: Zhengzhou HAIXU Abrasives | Black silicon carbide F014 F016 for ductile iron foundry Product Introduction Black silicon car... |
 |
Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm | Seller: Zhengzhou HAIXU Abrasives | Silicon carbide refractory fraction 1-3mm 1-5mm 1-10mm Product Introduction Black silicon carbi... |
 |
Refractories for Iron & Steel Industries | Seller: Jiabo Trading |
