Unique advantages Indoor Fixtures? you can choose T600 LED
TG Photoelectric Technology Co., Ltdlocated in Guangdong Province,Shenzhen City,Bao'an District,Quansen Creative Park, Yuanfen Industrial Zone, Longhua District, Shenzhen 518109, China,with elegant environment and convenience.market information delivered smoothly.TG LTD is a specialized LEDLinear High Bay,DesignLights Consortiumx1a1a6a6n company.
TGThe correct selection method and device configuration of LED lighting drive power supply As the LED energy saving, long life, durable and flexible design, the current LED is rapidly replacing indoor and outdoor lighting in the incandescent and fluorescent lamps. But choosing the right LED is just part of the design equation. In order to achieve full efficiency, durability and longevity of your solid state lighting design, you need to choose the right power supply to match your application requirements and the LEDs used. This article will provide you with some useful advice on where to choose the power supply process to consider. Related background introduction Once the LED supply voltage is equal to or greater than the forward voltage ｄｒｏｐ of the diode (usually in the 2-3V region), the LED begins to produce light. The current required for full brightness varies from device to device, but is typically 350mA for 1W LEDs (usually the smallest size for lighting applications). Unlike incandescent lamps, LEDs are non-linear devices. This means that once the supply voltage exceeds the forward voltage of the diode, the current passed increases exponentially with the supply voltage. Without some form of current regulation, the LED chip will become an expensive, monostable flash bulb. To prevent this, the power supply must supply the appropriate voltage at the appropriate current. The easiest way is to select a power supply whose output voltage is greater than the selected LED forward voltage and use a current limiting resistor to limit the current to the maximum specified by the LED manufacturer. The disadvantage of this approach is that one of the main advantages of LED lighting is the efficiency of the power dissipation of the current limiting device. Another problem with this approach is that the LED junction temperature affects the forward voltage. Since the output voltage of the power supply is fixed, this in turn means that if the voltage across the current limiting device changes, the current will also change. The change in current will affect the amount of light emitted and reduce the reliability of the LED. The best way is to drive the LED with a constant current source. In this way, the current can be set to the maximum value specified by the LED manufacturer to achieve maximum efficiency and reliability, or to achieve the desired precision brightness, and can also eliminate the effect of junction temperature when the LED or ambient temperature changes. In lighting applications, one of the benefits of using LEDs is easy to change the brightness. This can be achieved by changing the current through the LED, but running LEDs at less than their maximum current can degrade efficiency and may result in slight changes in color. Therefore, a better approach is to pulse the current between zero and maximum to change the average light emitted. As long as this is done at a sufficiently high frequency to avoid the pulse being seen by the human being as a flash, which is the best way to achieve dimming. The pulse of the current is usually carried out at a fixed frequency, and the ratio of zero to full current changes. This is a pulse width modulation (PWM) method. Select the power supply The type of power supply for lighting applications will be based on several factors. First, consider the application to run the environment. Is the application indoors or outdoors? Does the power supply need to be waterproof or require a special IP rating? Is the power supply capable of using conduction cooling or only convection cooling? Next, define the overall power requirements. A single lamp may require only a small power supply, but a complex system may need to provide hundreds of watts of power. Do you need other features? For example, whether the power supply needs a simple constant voltage is focused on LEDUFOHigh Bay the powerful, Integrity Indoor Fixtures, The best Word of mouth LEDLow Bay, Service is better LEDUFOHigh Bay and other projects. even though in the rapid development of the project ,TG always stressed the balance between external opportunities and internal management, attaches great importance to the core compet
TGadheres to advance with the times and advocates to the service-oriented,faith-based, people-oriented management idea. With a belief of customer first to forge ahead , company insists on providing our clients with satisfying and best service ofDesignLights Consortium,Outdoor Fixtures, ![]()
Другие товары поставщика
|
|
480VHigh Baywith high quality , do not hesitate to choose m |
TG Photoelectric Technology Co., Ltdis a company with First rate service LEDPanel Light,LEDPanel LightandLEDCanopy Lightx1a1a6a6n as the main busin... |
|
|
T600 LED Linear High BayLEDLinear High Bay|LEDHigh Bay| pre |
TG Photoelectric Technology Co., Ltdlocated in Guangdong Province,Shenzhen City,Bao'an District,Quansen Creative Park, Yuanfen Industrial Zone, Lon... |
|
|
TGOutdoor Fixtures,that LEDT8 Tube is very popular with con |
TG Photoelectric Technology Co., Ltdis a company with 347VHigh Bay good service business,CERoHSCertificationandLEDT8 Tube as the main business. We ... |
|
|
Outdoor Fixturespreferred TG,its price is areasonable,econo |
TG Photoelectric Technology Co., Ltdis a company with Good sales in the industry 347VHigh Bay,CERoHSCertificationandLEDT8 Tube as the main business... |
|
|
安徽省Outdoor FixturesOutdoor FixturesOutdoor Fixtures |
TG Photoelectric Technology Co., Ltd is a professional company inCERoHSCertification,LEDT8 Tube. Since its inception,with innovative technology,adv... |
Все товары поставщика
Похожие товары
