Don't waste time, choose digital controlled turning parts,

• 

Shenzhen Tianyang Precision Limitedlocated in 3rd floor, D building, GongChuangYing Industry Area, No.8 BaoDan Road, NanWan, Buji. Longgang, Shenzhen, GuangDong. China,Longgang District,Shenzhen City,Guangdong Province,China,with elegant environment and convenience.market information delivered smoothly.Tianyang LTD is a specialized machining suppliersx1fb1146n,precision metal machining company.

TianyangHazard prevention of mechanical equipment There are many kinds of machinery and equipment used in modern industrial production, and have their own characteristics, but they also have many similarities. Therefore, the prevention of mechanical damage can be strengthened from the design, manufacture and inspection of mechanical equipment, installation, use, maintenance, and operation environment. The design and manufacturing process of preventive measures Machinery and equipment manufacturing enterprises must design, manufacture and install safety protection devices when designing and manufacturing production equipment, so as to achieve the essential safety of machinery and equipment, and not leave problems to users. The specific requirements are as follows: The setting of protective devices The requirement is to set up a protective device for all dangerous parts and dangerous parts such as all transmission belts, rotating shaft, drive chain, coupling, pulley, gear, flywheel, sprocket, chainsaw and other dangerous parts within the height of 2m, based on the plane of the operator's position. Requirements for protective devices: A. Strong installation, reliable performance, and sufficient strength and stiffness; B. Suitable for machine and equipment operating conditions, without hindering production and operation. C. Durable, does not affect equipment adjustment, repair, lubrication and inspection; The D protection device itself should not cause harm to the operator. E. When the machine is abnormal, the protective device should have the function of preventing danger. The electrical, electronic and mechanical components of F automatic protective device require accurate operation, stable performance and the way to check whether the line performance is reliable. The design of machinery and equipment, must consider the convenience of inspection and maintenance. When necessary, a special inspection, maintenance tool or device shall be supplied with the equipment. In order to prevent the operation of the equipment or parts more than the limit position, the limiting device shall be equipped with reliable. The equipment should be set up a reliable braking device, in order to ensure the approaching danger effectively during braking. The gas and liquid transmission machinery equipment, should have control over pressure, prevent leakage of device. It is easy to throw out the machine parts in high speed operation, should be designed to prevent loosening device configuration, protective cover or protection network safety device. The operation of the machine, the position of 2m high above ground, configure the operating table, railings, handrails, coaming etc.. These control devices should be installed in the operator can see the entire operation of the equipment in the console at the position, can not see all control equipment, must be installed in the appropriate location of the emergency switch equipment. All kinds of machinery and equipment, must be adopted in the design measures to prevent noise, the machine noise noise below the national standard. We will produce dust, harmful gases or steam and process equipment, should be used in the automatic feeding, automatic unloading device, and there must be inhaled, purification and discharge device, to ensure that the workplace emissions of harmful substances concentration in compliance with the relevant requirements of TJ36-70 industrial enterprises "design" and "industrial hygiene standards" GBJ4-73 the "three wastes" emissions standards. Design, machinery and equipment, should use safe color. Safety marks must be marked for vulnerable parts. Safety colors and signs should be kept in bright, clear and lasting colors. The machine generates high temperature, low temperature, strong radiation and other parts, its screen protection measures. Good grounding electrical equipment should have good (or zero), to prevent electric shock, and anti-static. The installation and use of preventive measures 1 to provide according to the manufacturer's instructions. The installation of machinery and equipment and technical data. The self-made machine and equipment should also meet the requirements of GB5083-85 "general principles for safety and hygiene design of production equipment". According to the health and safety of the "three simultaneous" principle, the necessary safety protection device is arranged in the installation of machinery and equipment, such as protective fence, safety operation platform. The equipment supervisor or the relevant department shall formulate equipment operation procedures, safety procedures and equipment maintenance system, and implement. C. strengthen maintenance The daily maintenance requirements, workers should be done in each class in the production: before the class, after class to check and clean the machine equipment parts on time, quality; refueling; keeping the equipment cleaning, lubrication, good. In the class, the machine equipment is used strictly according to the operating rules and the fault is eliminated in time, and the handover work is done well. The level of maintenance, operation to workers, maintenance workers, local disintegration and inspection of the equipment; the provisions of cleaning the site; clean the oil filter, oil filter and oil pipe, oil hole, linoleum, oil line, achieve smooth circuit, oil standard eye-catching; adjust the equipment of the site clearance. Solid parts. The two level maintenance, to repair workers, workers in operation, the equipment for the local disintegration inspection, repair or replacement of wear parts, so that the local recovery precision; cleaning, lubrication system inspection, replacement of aging oil; check and repair the electrical system and security device.is focused on cnc mill good service reputation, The most promising cnc turning, custom cnc milling quotation pictures, Cost-effective cnc milling company and other projects. even though in the rapid development of the project ,Tianyang always stressed the balance between external opportunities and internal management, attaches great importance to the core competitiveness of enterprises to cultivate and shape. Our company take the value of customer service as the core competitiveness of enterprises, adhering to the honesty and integrity , the pursuit of excellence, respect individual for the corporate spirit, and strive to provide customers with integrity and reliable digital controlled turning parts, CNC lathe processing parts.

Tianyangadheres to advance with the times and advocates to the service-oriented,faith-based, people-oriented management idea. With a belief of customer first to forge ahead , company insists on providing our clients with satisfying and best service ofmetal turning,cnc milling company,

Другие товары поставщика

	Tianyangspecializes in cnc milland cnc machining parts ser	Shenzhen Tianyang Precision Limitedis a company with Fair price precision cnc milling,cnc millx1fb1146nandcnc machining parts as the main busin...
	Anhui ProvinceCNC center processing partsCNC center process	Shenzhen Tianyang Precision Limitedlocated in 3rd floor, D building, GongChuangYing Industry Area, No.8 BaoDan Road, NanWan, Buji. Longgang, Sh...
	one-stop service Good service, good faith cnc turning parts	quality cnc machiningx1fb1146nandmillingof Shenzhen Tianyang Precision Limitedis favored by the majority of customers love, We have established lon...
	machining, a leadingprecision cnc milling brand which has a	Shenzhen Tianyang Precision Limitedlocated in 3rd floor, D building, GongChuangYing Industry Area, No.8 BaoDan Road, NanWan, Buji. Longgang, Shenzh...
	Shenzhen Tianyang Precision Limited,an expert ofmachining s	Shenzhen Tianyang Precision Limited is a professional supplier which provides a variety of cnc mill, to provide customers withHigh quality and high...

Похожие товары

	Криогенные морозильники с жидким азотом Коморских Островов Сосуд KGSQ ln2	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	В лаборатории образцы клеток необходимо помещать в жидкий азот для криогенного хранения. Однако н...
	Бруней Криогенная морозильная камера ln2 Криогенный резервуар с жидким азотом KGSQ	Продавец: Henan Tianchi Instrument & Equipment Co., Ltd.	В лаборатории образцы клеток необходимо помещать в жидкий азот для криогенного хранения. Однако н...
	Криоморозильник ln2 для Бутана, канистра с жидким азотом KGSQ на продажу	Продавец: Henan Tianzhidao Biological Technology Co., Ltd.	В лаборатории образцы клеток необходимо помещать в жидкий азот для криогенного хранения. Однако н...
	MONSA® DDAC-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture...
	MONSA® DCA-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp...