Cyto Centrifuge
Maintenance ofCyto Centrifuge
1. Before the centrifuge is operated, the power should be cut off and the centrifuge brake should be loosened first. You can manually turn the drum to see if there is any biting.
2. Check for looseness and abnormality in other parts;
3. Turn on the power and start the drive in a clockwise direction (usually about 40-60 seconds from the stationary state to the normal operation);
4. Usually, after each equipment arrives at the factory, it must be empty for about 3 hours, and it can work without abnormal conditions;
5. The material should be placed as evenly as possible;
6. Must be operated by special personnel, the capacity must not exceed the rated amount.
7. It is strictly forbidden to operate the machine so as not to affect the service life of the machine;
8. After the machine is started, if there is any abnormal situation, it must be stopped to check and repair and repair if necessary;
Email:
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Experimental results of a refrigerated high speed centrifuge | The results of aRefrigerated high-speed centrifugewill be announced again. After the experiment, the customer said: "I was very satisfied with the ... |
 |
High Speed Microcentrifuges are based on technology | The High Speed Microcentrifugeis a high-tech product integrating multi-disciplinary and multi-technology. There are many manufacturers and products... |
 |
PRP (platelet rich plasma) centrifuge | BIORIDGE PRP (platelet rich plasma) centrifuge is not only used in the beauty of the centrifuge is also used in the Department of orthopedics, diab... |
 |
Customizable low speed centrifuge | Low speed centrifugeproduced by Shanghai Lu Xiangyi is widely used in clinical medicine, biology, genetic engineering, immunology, etc. It is suita... |
 |
Refrigerated high speed centrifuge | How to use Refrigerated high speed centrifuge correctly?To ensure safety and centrifugation, the instrument must be placed on a sturdy, level surfa... |
