Allen bradley 1771-IAD/D distributors
Rockwell automation :Allen-Bradley
Allen-Bradley is the brand-name of a line of factory automation equipment, today owned by Rockwell Automation. The company, with revenues of approximately US $6.4 billion in 2013, manufactures programmable logic controllers (PLC), human-machine interfaces, sensors, safety components and systems, software, drives and drive systems, contactors, motor control centers, and systems of such products.
Product detail
Depending on the configuration of your application, you can use one of the following devices to make additional POINTBus backplane current or field power current available:
• 1734-EP24DC POINT I/O Expansion Power Supply - An expansion power supply is installed between embedded I/O modules and local expansion modules or between local expansion modules.
The expansion power supply breaks the available POINTBus backplane current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 1 A of POINTBus backplane current. The modules to the right of the expansion power supply can draw as much current as the current provided by the expansion power supply.
Additionally, the expansion power supply breaks the available field power current between the modules to its left and right. With the expansion power supply installed, the modules to its left can draw up to 3 A of field power current. The modules to the right of the expansion power supply can draw as much field power current as allowed by the expansion power supply.
• 1734-FPD POINT I/O Field Power Distributor Module - A field power distributor module can also be installed between embedded I/O modules and local expansion modules or between local expansion modules.
The field power distributor module breaks the available field power current between the modules to its left and right. With the field power distributor module installed, the modules to its left can draw up 3 A of field power current. The modules to the right of the field power distributor can draw as much field power current as allowed by the field power distributor.
The specific configuration parameters for a system determine the impact on actual RPI rates. These configuration factors can impact the effective scan frequency for any individual module: • Rates at which the RPI rates of other 1734 POINT I/O module are set
• Number of other 1734 POINT I/O modules in the system
• Types of other 1734 POINT I/O modules in the system
• Application user task priorities
Controller, 1MB Memory, 8 I/O Expansion, 16 Ethernet IP Nodes, 1GB SD
Controller, CompactLogix 5370 L3, Dual Ethernet w/DLR capability, 1 MB Memory, 8 I/O Expansion, 16 Ethernet IP Nodes, No Supercap for RTC, Controllers are shipped with 1 GB SD Card and Can Support up to 2 GB SD Card
Model Selection GuideLegacy SystemDescriptionRacks4 I/O Slot Rack8 I/O Slot Rack12 I/O Slot Rack8 Slot Rack -Red. Power12 Slot Rack - Red. PowerRedundant CPU RackControllersController C50 CPUController C30 CPUController C70 CPUController C70R CPURedundancy switch moduleI/O Scanner - 2 Port (1 per I/O rack)I/O Scanner (for remote rack)Redundant Power Status ModulePower Supplies120/240VAC, 60W120/240VAC, 28W+24VDCI/O ModulesAnalog Input (8 channel)High Level Analog Input (16 channel)Analog Output, 0 to 20mA, (4 channel)Analog Output, 0 to 20mA, (8 channel)Analog Output, 0 to 20mA, (16 channel)Digital Input, Contact type, (16 channel)Digital Input, 24VDC (16 channel)Digital Input, 24VDC (32 channel)
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
IC693MDL733 programmable logic controls | Powering forward GE Power creates the energy technologies of the future and improves the power networks that we depend on today. We create a thir... |
 |
General Electric sensor organ | Brand new and original in box--2-3 days against the payment--1 Year Warranty--Full Tested --Worldwide Shipping --Good Service..Emergency ... |
 |
IC610MDL135 | IC610MDL135 IC610MDL135 Contact Information Sales person:Trixie Contact us freely once you checked our profile!!! Your Cambia Solution... |
 |
IC200ALG630 | Quick Details Place of Origin: Japan Brand Name: Fanuc Name: FANUC SYSTEM UNIT Quality: 100% tested OK Application: FANUC CNC Machines Item: ... |
 |
3300/ | Lead Time:IN STOCK Product Orgin:USA Shipping Port:XIAMEN Payment:TT DETAILS Contact Molly Email: Mobile/Skype/Whatsapp/ Limited Our com... |
