BKNET-0102 Welded Pipe Eddy Current Flaw Detector
Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.
Eddy current weld testing is a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.
Eddy current weld testing is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.
BKNET-01 2 NDT weld testing equipment is used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.
Nanjing BKN Automation System Co., Ltd. is an ultrasonic testing equipment manufacturersand has long been committed to the development and production of bearing hardness and crack eddy current testingequipment.
BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance
|
Detection channel |
Double channel |
|
Detection speed |
1～500m/min(online) |
|
Frequency range |
100Hz-1MHz |
|
Gain |
0～99dB，step0.1dB |
|
Phase rotation |
0-360°step1° |
|
High pass |
|
|
Low pass |
1Hz～10000Hz |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:
High precision end and end-to-tail signal removal
High precision real-time, delayed alarm output
Fast digital／analog electronic balance
Memory track delay blanking function
Non-equal amplitude phase／amplitude alarm domain
Remote automatic help system
Synchronous alarm output for internal and external clock control
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Benchtop Magnetic Flux Leakage Testing Equipment | MFI Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to def... |
 |
BKNET-101 Automatic Eddy Current Testing | The eddy current testing(BKNET-101) is a fully automated eddy current inspection system that uses large-scale imported integrated circuits combined... |
 |
Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02 | During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d... |
 |
Оборудование для вихретокового контроля | ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ... |
 |
Eddy Current Testing Equipment | An electric pulse is a pulse generated by electrons, and a pulse is a process of changing a voltage in a short time. Electropulsing is an unsteady ... |
