Gas Assisted Injection Molding
With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold and molding,plastic parts and precision components.
Gas assist molding, also known as gas injection moulding, is a newgas injection moulding process. It is one of the most important developments in the injection molding industry since the advent of reciprocating screw injection machines. Gas assisted injection molding processis an extension of injection molding. It is developed on the basis of injection molding technology and structural foam injection molding. it can also be considered as a composite of injection molding and hollow molding. In this sense, it can also be called "Hollow injection molding". The principle is to replace the resin pressure in the cavity with a relatively low-pressure gas during the pressure holding phase of the original injection molding. Gas-assisted injection can be achieved by simply adding an air supply device to the existing injection molding machine. The gas supply device is composed of an air pump, a high-pressure gas generating device, a gas control device, and a gas nozzle. The gas control device uses a special compressor to continuously supply gas, and is controlled by an electronic control valve to keep the pressure constant. There are usually 3 levels of pressure. A set of gas control device can be equipped with multiple injection molding machines.To achieve this, whole gas injectino moulding process required closely connections.
The gas generally used is nitrogen. Gas pressure and gas purity are determined by the shape of the molding material and product. The pressure is generally 5 ~ 32MPa, the highest is 40MPa.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PC Injection Molding | PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at... |
 |
Nylon is commonly referred to using thNylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off | Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white,... |
 |
Medical Plastic Injection Molding | Feman medical parts are essential component of Feman tooling. There is special department in-house that only service for the medical customers. A t... |
 |
POM Plastic Injection Molding | POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplas... |
 |
Nylon Injection Molding | Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white,... |
