Automotive PCB
Automotive electronic products have different reliability requirements for PCBs in different parts,Huihe Circuit passed the IATF16949 automotive quality management system standard,Strictly follow the requirements of the control plan to produce, monitor, record and analyze,Ensure the stability of process parameters and the traceability of the production process.
Classification Of Automotive Circuit Board
Car Body Electronic Control System
Engine control system
Ignition control system
Fuel control system
Air supply system
Body control system
Power management system
Safety management system
Lighting system
Display monitoring system
Chassis control system
ABS control system
Electronic stability system
Pressure monitoring system
Steering control system
On-Board Electronic Control System
Car TV
Driving recorder
Parking sensor system
Car navigation system
Vehicle camera system
Huihe Circuits knows that the reliability of automotive electronics is equivalent to the reliability of automobiles, so it is necessary to ensure that the reliability of automotive electronics meets the requirements of service life and environmental tolerance. The PCB used in the automotive electronic system needs to withstand the test of various environmental changes, such as temperature and humidity, climate, acid mist, vibration, electromagnetic interference, current impact, etc.; in order to ensure the normal life cycle, the PCB needs to meet high reliability, high integration, high The characteristics and requirements of heat dissipation, high current (thick copper), light weight and miniaturization, and embedded devices. For example, the high-voltage control system of a new energy electric vehicle uses a strong current board to integrate the original scattered high-voltage device parts, scattered DC/charge/discharge/MCU and other functional parts on a PCB. The density has increased several times, but The structural space should be saved by 30%, and the manual assembly efficiency should be increased by 50%.
Under this development trend, Huihe Circuits has taken the following measures to ensure the high reliability of PCBs for automotive electronics: Pass IATF16949 automotive quality management system standards; automotive electronic products have different reliability requirements for PCBs in different parts, and fully understand these requirements and Select appropriate materials and production processes, reliability testing and testing according to characteristics; formulate material selection rules; select appropriate materials according to the use parts of automotive electronic products during engineering planning; strictly follow the requirements of the control plan for production, monitoring and recording ; Key processes and key characteristics are monitored and analyzed by SPC; to ensure the stability of process parameters and the traceability of the production process; based on the IPC-TM-650 standard, a set of systematic and strict product performance testing methods and evaluations have been established Mechanism, including thermal cycle test, high temperature thermal shock, salt spray test, high current shock, high voltage resistance, electromigration, etc.
Huihe Circuits is a professional custom pcb maker, we provide 5g circuit board, automotive printed circuit board, rc remote control circuit board, circuit board of remote control car, remote control car pcb, rc remote control board, rc car pcb board, rc car pcband etc. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Communication Equipment PCB | In order to shorten the signal transmission distance and reduce the signal transmission loss, the 5G communication PCB, gradually move towards high... |
 |
2 Layer ENIG Half Hole PCB | Number of layers: 2 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 8.5/3.5mil Thickness: 0.8mm Special process: half hole Advanta... |
 |
4 Layer High TG Impedance Control Fine Pitch PCB | Number of layers: 4 Surface finish: ENIG Base material: High TG FR4 Outer Layer W/S: 4/3.5mil Inner layer W/S: 4/3.5mil Thickness: 1.0mm Spec... |
 |
2 Layer Taconic ENIG PCB | Number of layers: 2 Surface finish: ENIG Base material: Taconic TLY-5A Outer Layer W: 1.046mil Outer layer S: /mil Thickness: 0.94mm Advantag... |
 |
Via In Pad Fr4 PCB | Via In pcb board material fr4, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into ... |
Похожие товары
 |
Microcrystalline wax used for rubber plastic processing and modification | Продавец: Syntop chemical Co.,Ltd. | Microcrystalline wax has a wide range of industrial applications, primarily in the areas of rubbe... |
 |
Microcrystalline wax 80A used for lubrication and demolding | Продавец: Syntop chemical Co.,Ltd. | The core industrial applications of microcrystalline wax 80A are primarily focused on rubber prot... |
 |
Tyvek Flat Roll Pouch | Продавец: Hopeway AMD | Tyvek Flat Roll Pouch is designed for professional sterilization packaging, offering clean handli... |
 |
Industrial Warehouse Ceiling Fans | Продавец: Hebei Windmax Power Technology Co., Ltd. | Industrial Warehouse Ceiling Fans Industrial Warehouse Ceiling Fans for Warehouses, Logisti... |
 |
HVLS Ceiling Fan for Railway Station | Продавец: Hebei Windmax Power Technology Co., Ltd. | HVLS Ceiling Fan for Railway Station for Railway Station All units are CE-certified, manufa... |
