Castor Oil Press Machine
Castor oil extraction machineis composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is carburized by alloy steel to enhance surface hardness and wear resistance. The screw platter is ground by the surface grinding machine. It can guarantee oil line precision and improve oil output rate. The castor oil extraction machine’s distribution, automatic heating, and other standard components are all selected from well-known brands, which optimizes machine configuration. The surface of the machine is treated with stainless steel and chromium plating, meeting food hygiene standards.
Characteristics of castor oil press machine:
The production process of castor oil press: the castor oil press should be checked on the lubrication condition every 50 hours or so. The oil cup on the reducer should not be short of oil. The bearing in the adjusting screw shaft should be filled with butter every shift in the adjusting screw hole. All lubricating parts shall prevent the invasion of dust and other impurities. The oil quality of the reducer shall be checked once a year. If any deterioration is found, all oil shall be replaced. When the amount of pressing is reduced and, the screw shaft should be extracted. Check the wear of the screw, the strip, and the ring. The worn parts should be replaced in time. At the end of each shift, the machine should be cleaned. It should be maintained before long-term storage. Remove, wash and re-grease the screw and strip, and put them in the dry place.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Walnut Oil Press Machine | Introduction to the walnut oil extraction machine Walnut oil extraction machine presses the walnut with a screw oil press. walnut oil press equipme... |
 |
Castor Oil Press Machine | Castor oil extraction machineis composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is ca... |
 |
Castor Oil Press Machine | Castor oil extraction machineis composed of electrical control, automatic heating, adjustment, transmission, and vacuum oil filter. The screw is ca... |
 |
Small And Medium Scale Single Oil Press Machine | For small oil factory using- the processing capacity from 50kg/h to 200kg/h, with the characteristics of the small investment, wide compatibility, ... |
 |
Peanut Oil Press Machine | New groundnut oil expeller machinesuccessfully makes up for the defect that the peanut cake cannot be reused after being pressed at a high temperat... |
