ASTM A500 Steel Pipe

• 

ASTM A500 Steel Pipe

ASTM A500 is the standard specification for circular, square, and rectangular tubes of cold-formed welded and seamless carbon steel structures. ASTM A500 is the most common specification for Hollow Structural Sections in North America. The correct way to specify the circular HSS section is to represent the outer diameter in decimal inches to three decimal places (i.e., 5.563 x 0.250) according to the nominal wall thickness.

Why A500 Steel Pipe?

Since ASTM A500 is a structural specification, circular high-speed steel produced according to this specification is suitable for structural applications and general construction purposes.

The specified yield strength of A500 Grade C pipe(the most commonly available grade) is 46 ksi. The specified yield strength of A53 Grade B is 35 ksi. Yield strength increased by more than 30%. Therefore, the strength-to-weight ratio of A500 circular HSS is greater than that of the A53 pipe. So, if you do the job with round HSS, you need less steel, by weight, to do the job—the lighter it is, the lower the cost.

The tolerances of A500 are tighter than those of A53, so the HSS of the A500 circle has higher quality and less variability. If you want to know the difference between A500 pipe and the A795 pipe, continue browsing.

Round HSS has a superior surface finish and is not as lacquered as normal A53 tubes. Since this lacquer coating needs to be removed from the A53 pipe to accommodate welding and painting, so this can save money and time.

ASTM A500 PipeApplications

All steel structures have their pros and cons including structural supports, building columns, highway signs, oil field services, and communication towers, to name a few. But ultimately ASTM A500 is a better choice when you need a round profile.

We encourage architects, fabricators, structural engineers, and contractors to read up on ASTM A500 and visit The Steel Tube Institute's website because it offers a wide variety of technical publications, load tables, and design aids.

Hebei Tianchuang Pipe Co., Ltdis a professional china steel pipe suppliers, we provide china steel pipe, steel gas pipe and etc. Want to know more? Please contact us.

Другие товары поставщика

	Steel-plastic Composite Pipe	Brief Introduction of Steel-plastic Composite Pipe Tianchuang is an experienced steel plastic composite pipesupplier and manufacturer. If you ar...
	Thrie Beam Highway Guardrail	The thrie beam guardrailis the main form of the semi-steel guardrail. It is a continuous structure in which corrugated steel guardrails are spliced...
	Greenhouse Pipe	Steel galvanized pipes for greenhouse The frame structure of the greenhouse is much more important than the material used as the wallboard, but an...
	Steel-plastic Composite Pipe	Brief Introduction of Steel plastic Composite Pipe Hebei Tianchuang Pipe Co., Ltdis a professional steel pipe fabricators, we provide steel pip...
	S355JR steel pipe	What is S355JR? S355JR is a useful structural grade steel with a minimum yield strength of 355 N/mm². S355 is widely used in the structura...

Похожие товары

	YC160W Wheel excavator YC160W	Продавец: Guangxi Yuchai Equipment Technology Co., Ltd	YC160W Wheel excavator YC160W wheel excavator is a new generation of full hydraulic wheel excavat...
	Yuchai U20 mini excavator	Продавец: Guangxi Yuchai Equipment Technology Co., Ltd	Yuchai U20 mini excavator Improvements in Over 80 Details: Tailless Excavator U20 is a Yuchai ...
	Yuchai YC80 small excavator	Продавец: Guangxi Yuchai Equipment Technology Co., Ltd	Yuchai YC80 small excavator International brand engine It is equipped with Yanmar 4TNV98C natur...
	Top Type Hydraulic Breaker	Продавец: Guangxi Yuchai Equipment Technology Co., Ltd	Top Type Hydraulic Breaker With the higher restriction of blasting control,hydraulic breakeris w...
	S35-Electric Skid Steer Loader	Продавец: Guangxi Yuchai Equipment Technology Co., Ltd	S35-Electric Skid Steer Loader Yuchai S35 Electric Skid Steer Loaderis compact and flexible, des...