Metal Heat Transfer Thermal Oxidation Device（TNV）
Direct fired thermal oxidizer（TNV） is used to purify industrial waste gases containing high concentrations of organic pollutants, The system is characterized by a very high utilization rate of heat in system. Combined with a downstream heat recovery system, the unit is inexpensive to operate and requires only a small amount of external fuel heating.
HOW DOES THE TNV TECHNOLOGY WORK
After a heat transfer, the exhaust gas is directly burned by the combustion machine, combined with the heat released by the oxidation and decomposition of the solvent itself, which makes the furnace reach 750~800℃, and stays for 1~2 seconds, and the final destruction efficiency can reach 99.8%.
TNV Air Flow Range & Efficiency
Applicable flow rates from 2,000 to 55,000 Nm³/h
Heat utilization of 76% within the system
Heat recovery systems for air, water, oil, steam, and for absorption chillers
Low maintenance
Long service life
Easy operation
TNV Design Features
Preheating device: The oxidizer needs to be heated to above 700 degrees to start the oxidation reaction. The system requires a large amount of heat. The use of a preheating heat exchanger, along with the heat from the high-temperature exhaust gas exiting the oxidizer, can significantly reduce fuel consumption.
Automatic temperature control: The temperature for carrying out the oxidation reaction can be set as required, and the output of the burner is automatically adjusted by PLC to maintain the temperature according to the temperature inside the oxidizer
RUIYUAN Printing Equipment Co. Ltd., is aprofessional offset printing machine manufacturers, we provide offset printing press machine,dfto, metal decorating printing, etc. Want to know more? please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Intelligent RYYT 453 Series Metal Printing Machine | China's first intelligent metal colour printing machinecomes from RYYT 453 series. Especially the upgraded 453 series achieve full automation, the ... |
 |
CTP Computer to Plate Printing Machine | CTP (computer to plate machine) refers To Computer direct Plate making, which uses laser scanning To record digital page information on the Plate, ... |
 |
Regenerative Thermal Oxidizer (RTO) | Regenerative Thermal Oxidizer (RTO) produced by RUIYUAN uses ceramic media to recover upwards of 97% of the available energy and is widely consider... |
 |
Regenerative Thermal Oxidizer (RTO) | Regenerative Thermal Oxidizer (RTO) produced by RUIYUAN uses ceramic media to recover upwards of 97% of the available energy and is widely consider... |
 |
Regenerative Thermal Oxidizer (RTO) | Regenerative Thermal Oxidizer (RTO) produced by RUIYUAN uses ceramic media to recover upwards of 97% of the available energy and is widely consider... |
Похожие товары
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
