Cooling Tower Float Ball
The cooling tower floatball, also called the cooling tower floating valve, is designed at the bottom of the pool. When the float ball is lower than the set value, the cooling tower will make up water automatically.
One section of the float ball is fixed on the pool wall of the cooling tower and connected by sliding screws. The float ball can float up and down according to the height of the water surface. The outer end of the float ball is a make-up water interface, which is not connected with the water pipe.
Types Of Cooling Tower Float Ball
Cooling Tower Float Ball For Mesan
Cooling Tower Stainless Steel Float Ball Valve
Working Principle of Float Ball in Cooling Tower
The float ball always floats on the water. When the water surface rises, the float ball also rises. When the float ball rises, the connecting rod also rises. The connecting rod is connected with the valve at the other end. When the cooling tower float ball rises to a certain position, the connecting rod supports the rubber piston pad to close the water source. When the water level drops, the float ball also drops, and the connecting rod drives the piston pad to open.
Features of Cooling Tower Float Ball
Precautions for Installation of Float Ball in Cooling Tower
Float ball are widely used in tap water, water tower, water tank, pool, chemicals, petrochemical, petroleum, paper, mining, power, food, drainage, municipal, mechanical equipment, electronic industry, urban construction and other fields.
Contact us to buy cooling toweror know the types of cooling tower.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cooling Tower Gearbox | Cooling tower motoris a new type of energy-saving and environmental protection improved motor, with protection grade of IP55, insulation grade of B... |
 |
Cooling Tower Drift Eliminator For Mesan | The main function of drift eliminator in cooling tower is to prevent steam loss. Generally, it is placed above the filler of cooling tower, which c... |
 |
Cooling Tower Filling For Gea | GEA filling is made of corrugated PVC sheet, which can obtain maximum strength by solvent welding, and is resistant to ultraviolet, rot, fungi, org... |
 |
Round Counter Flow Cooling Tower(AB) | A round shape counter current cooling toweris a kind of equipment that uses the contact of water and air to disperse the waste heat generated in in... |
 |
200 Ton Cooling Tower | Square Cross Flow Cooling Tower (AH) The cross flow tower is the abbreviation of cross flow cooling tower. The cross flow tower refers to equipmen... |
Похожие товары
 |
C500-1.7 Series High Flow Multi-Stage Centrifugal Blower /Centrifugal Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrif... |
 |
Common Rail injector control valve F00VC01303 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01303 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Common Rail injector control valve F00VC01200 | Продавец: China Lutong Part Plant | Common Rail injector control valve F00VC01200 Tina#Stainless Steel Cylindrical Pin##Denso Common... |
 |
Injector Control Valve Plate 24# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 24# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
 |
Injector Control Valve Plate 12# | Продавец: China Lutong Part Plant | Injector Control Valve Plate 12# Tina#Stainless Steel Cylindrical Pin##Denso Common Rail Injecto... |
