Cooling Tower Sprinkler Head
The cooling tower sprinkler head is a special water distributor for small and medium-sized round counter flow cooling tower. Through the small holes on the water distribution pipe, the water is evenly spread on the filler, increasing the water vapor contact interface, so that part of the water vaporizes and takes away heat, thus reducing the water temperature.
Types Of Cooling Tower Sprinkler Head
Cooling Tower Sprinkler Head For Liangchi
Cooling Tower Sprinkler Head For Kingsun
Material of Cooling Tower Sprinkler Head
ABS, nylon, nylon copper, aluminum alloy.
Maintenance Points of Sprinkler Head in Cooling Tower
- sprinkler for cooling tower, check outside the tower first, and arrange the sprinkler head and water distribution pipe of cooling tower. Check whether the bearing and diameter of sprinkler head of cooling tower are consistent with the diameter of water inlet of cooling tower.
- °angle with the packing plane of the cooling tower. And the spray direction of each water distribution pipe should be consistent.
Characteristics of Sprinkler Head in Cooling Tower
The sprinkler for cooling tower is corrosion resistant, high-strength, water and gas resistant, beautiful and durable, and it does not need maintenance for 3 years.
The working pressure at the outlet of the nozzle is only 0.6mh2o, which has a large pressure adaptation range, low cost and stable quality.
If the nozzle of the cooling tower is damaged for various reasons, the cooling tower sprinkler head can be replaced in time, shorten the time of system recovery and alert state, so as to be safe and reliable in use.
The spray head of cooling tower is easy to clean, makes the water distribution even and not easy to block, which is conducive to improve the cooling effect of cooling tower.
The nozzle of the cooling tower is very small, which is easy to block, which causes uneven water distribution and convenient maintenance.
We provide different types of cooling tower for sale, contact us to buy cooling toweror know use of cooling tower.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
200 Ton Cooling Tower | Square Cross Flow Cooling Tower (AH) The cross flow tower is the abbreviation of cross flow cooling tower. The cross flow tower refers to equipmen... |
 |
Cooling Tower Filling | As a cooling tower fills manufacturer, we supply different materials for the cooling tower fills with good prices such as PP and PVC. The honeycomb... |
 |
Cooling Tower Float Ball | The cooling tower float ball, also called the float valve, is designed at the bottom of the pool. When the float ball is lower than the set value, ... |
 |
Cooling Tower Filling | Our cooling tower incprovides cooling tower filling, drift eliminator, fan, motor, gearbox, belt reducer, spray nozzle, sprinkler head, float ball,... |
 |
Cooling Tower Air Inlet Louvers | The cooling tower air inlet louvers are also called air inlet grille, which is used to replace the air inlet shutter of the old inlet louver coolin... |
