Prototype Injection Mould

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering team into the good design but also allow us to provide competitive prices and high-quality molds. Most of our prototypes mold customers are from Honda. Every design needs proofing before they are produced by mass molding production especially for the automotive parts.

We will also make personal solutions for prototype mouldjust the same as production tooling. We share engineering information between our teams and our customers. Keeping close contact with our customers is one of the important factors that Packson has good performance in making tooling and molding. Therefore, we ensure that our communications between the engineering team and customers are always open and transparent.

Prototype Injection Mould

Prototype Mold Details And Options

We believe that it's important to test your market by first testing your product. Packson offers you an affordable method of testing with prototype parts. Our prototype processing helps you test your part design and make a small batch of parts for assembly testing. You may not very clear about the definition of prototype molds and the differences between prototype molds and injection molds. Here we can explain it for you:

Process For Prototype Mold

There are many things that need to be considered such as the product design needs to be perfect and it has to achieve actual full functionality before they get into the market. If there is any failure for your products which means the part design is not fulfilled yet and we need to keep improving the design and finding a better solution. Therefore, prototype mold is the best way for us to prove some issues before you are able to take your products into the market. Here is the process for prototype mold, you will find out what prototype mold exactly is:

There are 4 simple steps for prototype mold:

Start with a plastic part design

Initial concept or design is always the essential and critical part of manufacturing.No matter what kind of product you create like an electronic device or medical device, making the design and design should be the first step.

You should make sure of the feasibility and functionality when it comes to plastic product design. Moreover, you have to consider the concept is doable or not. If the design fails then it would waste time. But never mind, we have a professional engineer team who will make assessments for your design and provide our suggestions to help make the design better.

Providing DFM(Design for Manufacturing) and processing solution

We will make DFM according to your part design and offer a processing solution at a competitive price. Normally we will choose a removable insert which takes by hand during production, this will help cut some costs. But this is only used for small batch production within 500 shots. We will also analyze the thickness, angle draft, injection point, etc during these steps for making sure everything is ok before we start processing.

Mold creation or 3D printing

Simple 3D printing is fully sufficient for simple and small quantity plastic products. Therefore the expensive test mold is not neccessary.3D printing is a very simple process without much explanation. For another processing, the way is mold creation. This is the most important process in plastic prototyping. We will process the mold according to the tooling design and we will choose the steel which is softer and easier to carve out. This will help to make mold quickly with a short lead time. Rapid processing is one of the obvious features of the prototype mold. Because we don't need to make it like production mold as long as it can be operated and good for proving the customer's part design.

Making the prototype plastic molding parts by injection machine

For prototype mold, the plastic parts also need to be molded by a plastic injection machine. The mold will be placed into the injection molding machine and then injected with the plastic prototype material. Later material will be cooled by the water lines to allow it to create a shape on the cavity. After the cooling process, the mold will be opened when pressure from the clamp is released. Finally, the part will be ejected from the machine.

Applications of Prototype Mold

There are many applications for prototype molds like automotive, medical. These applications will keep increasing because of the development of new procedures. Here are some of them:

The making of molds – different grades of steel even plastic resin can be made through prototype mold.

The making of cores – SLS application is the latest technology used in sand casting shapes and cores.

The electrodes for EDM, making of marking stamps are some of the applications of prototype molds. Most of the applicated industry at Packson is automotive and medical.

There are many benefits for the prototype molds. With the features of low cost, quick lead time, and effective processing way, it will allow you to bring your parts into the market faster. The most important advantage is low-cost processing because it can make market testing with low volume production.

Why Choose Packson For Prototype Mold?

Prototype molds serve a different purpose. They are different from the production mold. First, they are pre-production molds which applied in testing and solving issues before a final product gets into molding processing. With a shorter lead time, prototype molds help create test products with further studies.

Here Packson offers you low-cost prototype molds by alternative means of:

Producing a small batch of molding parts so you can test the physical properties of the production parts

Proofing the concept design for the part and then make improvements for the part

Narrowing down material choosing determine what materials work best

At Packson, your first small steps are a critical part of the larger leap forward. Get your part get into the market quickly with Packson by contacting us today!

As a professional clean room injection manufacturer, Packson Moldprovides custom molding services, medical grade plastics injection molding, clean room injection moldingand etc. We have amassed considerable experience and understanding of the practical possibilities in this field. Contact us to know more.

Другие товары поставщика

	Explore Packson's Injection Molding Services	ISO Class 8 Clean Room Quality Control Low & High Volume Manufacturing Competitive Price Reliability and Stability With more than 20 years exp...
	Plastic Injection Molding	With more than 20 years of experience in the injection molding industry and equipped with ISO Class 8 Clean Room, Packson plastic injection mouldin...
	Product Design & Development	In addition to providing moulding die design solutions, we can also provide customers with product design optimization solutions to save more cost ...
	CNC Metal Machining Parts	Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic mac...
	Mold Components	We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days...

Все товары поставщика

Похожие товары

	Fresh Young Coconut	Продавец: Song Nam ITD Co., Ltd	Fresh Young Coconut is an organic fresh fruit and whole year round in Vietnam. Our fresh young co...
	Looking for Vietnamese green seedless lime exporter	Продавец: Song Nam ITD Co., Ltd	Song Nam is one of the best exporter of green seedless lime in Vietnam. With the long term cooper...
	Song Nam export Vietnamese dragon fruit	Продавец: Song Nam ITD Co., Ltd	Song Nam ITD has grown up from dragon fruit farmer families, so we understand all procedures from...
	Венгрия-самонагнетаемый резервуар жидкого азота-криогенный сосуд дьюара	Продавец: Хэнань Тяньчжидао Биотехнология Лтд.	Жидкий азот является ключевой охлаждающей средой в современных научных исследованиях и промышленн...
	Casting wax used for golf head manufacturing	Продавец: Syntop chemical Co.,Ltd.	Casting wax is mainly used in the field of aviation industry, civil precision casting, but also i...